POWAIR HP tank / Bottles HPA with pre-regulator 0.8L (48ci) - 200 bar / 3000 PSI
The POWAIR HPA bottle 0.8L is made of aluminum with a stainless steel core, which makes it lighter than normal steel bottles.
There is a 1/8 MTP thread at the top of the bottle regulator onto which the "weapon regulator" (such as Begadi Hurricane/Taifun) can then be screwed.
Procedure for the correct assembly sequence:
First screw on the gun regulator (such as Begadi Hurricane/Taifun), then connect the hose, then connect the hose to the gun and set the pressure.
Please note / safety instructions:
Never set the pressure above the maximum specifications of the gun (i.e. the maximum pressure of the HPA system installed in the gun), as this can lead to irreversible defects in the system. The bottle is equipped with two pressure relief valves (bursting discs 1.8K and 5K) which burst when overfilled.
Technical data:
Bottle length : 295mm
Bottle diameter : 90mm
Bottle weight : 1345g
Max. filling pressure : 200 bar / 3000 PSI. Filling pressure : 200 bar / 3000 PSI
Service life and handling of HPA bottles:
HPA bottles have a fixed defined service life of 10 years. All bottles are valid for 10 years from the date of production, after which they must be replaced. The date of manufacture of aluminium bottles is usually stamped on the neck of the bottle. It is important to handle your bottle with care. Avoid drops, transport safely in separate containers and do not fill too quickly as this can cause damage. Handling HPA Bottles requires a sense of responsibility as they are under high pressure. Always pay attention to their condition to avoid serious accidents.
More interesting articles and information about HPA
- Begadi "TAIFUN" HPA/CO2 Regulators
- Begadi "HURRICANE" HPA/CO2 Regulators
- Begadi HPA "Flex" hose, 100cm -black
- Begadi HPA "Flex" hose, 100cm - od-green
- Begadi HPA "Flex" hose, 100cm -TAN / FDE-
- Begadi Adjustable Pouch for HPA, 425g CO2 and gas cylinders
There is a 1/8 MTP thread at the top of the bottle regulator onto which the "weapon regulator" (such as Begadi Hurricane/Taifun) can then be screwed.
Procedure for the correct assembly sequence:
First screw on the gun regulator (such as Begadi Hurricane/Taifun), then connect the hose, then connect the hose to the gun and set the pressure.
Please note / safety instructions:
Never set the pressure above the maximum specifications of the gun (i.e. the maximum pressure of the HPA system installed in the gun), as this can lead to irreversible defects in the system. The bottle is equipped with two pressure relief valves (bursting discs 1.8K and 5K) which burst when overfilled.
Technical data:
Bottle length : 295mm
Bottle diameter : 90mm
Bottle weight : 1345g
Max. filling pressure : 200 bar / 3000 PSI. Filling pressure : 200 bar / 3000 PSI
Service life and handling of HPA bottles:
HPA bottles have a fixed defined service life of 10 years. All bottles are valid for 10 years from the date of production, after which they must be replaced. The date of manufacture of aluminium bottles is usually stamped on the neck of the bottle. It is important to handle your bottle with care. Avoid drops, transport safely in separate containers and do not fill too quickly as this can cause damage. Handling HPA Bottles requires a sense of responsibility as they are under high pressure. Always pay attention to their condition to avoid serious accidents.
More interesting articles and information about HPA
- Begadi "TAIFUN" HPA/CO2 Regulators
- Begadi "HURRICANE" HPA/CO2 Regulators
- Begadi HPA "Flex" hose, 100cm -black
- Begadi HPA "Flex" hose, 100cm - od-green
- Begadi HPA "Flex" hose, 100cm -TAN / FDE-
- Begadi Adjustable Pouch for HPA, 425g CO2 and gas cylinders
Review Partner