Gas Magazin für Army Armament R601 / HiCapa GBB, mit TTI Logo - mit Begadi Stainless Efficiency Ventil (28 BBs) [A195-CM]
![Magazine for Army Armament M1911 / R28, R29, R30 & R32 series, round bottom - with Begadi Stainless Efficiency valve (26 BBs) [A60]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/b/-/b-22121254-army-gbb-magazin-m1911-kurz-mit-begadi-efficiency-ventil-orange-g.jpg)
![Magazine for Army Armament R17 GBB Series, Long Version - with Begadi Stainless Efficiency Valve (50 BBs) [A225]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/b/-/b-22121249-army-gbb-magazin-r17-r34-long-version-mit-begadi-efficiency-ventil-purple-g.jpg)
Other interesting articles:
![AMOMAX Paddle Universal Double Stack Magazine Pouch [AM-MPU]](https://www.begadi.com/media/catalog/product/cache/d6065af5690f7b4693fa5e39cddb6292/b/-/b-amomax-magpouch-am-mpu-universal-double-stack-g.jpg)
Type: Gas magazine for 6mm BBs
Material: Metal
Capacity: 28 BBs
Suitable for:
- Army Armament TTI Combat Master / R601 HiCapa GBB
- WE HiCapa Series
With TTI logo on the base plate !
Not recommended for use with KJW HiCapa GBBs (or KP05/KP06).
This magazine is already equipped with our Begadi Army Armament Efficiency valve made of stainless steel.
This valve, due to its smoothness and revised design, provides a much more constant energy output and reduces gas consumption by up to 20%.
For example, it is possible to fire up to 65 rounds from an R17 GBB magazine, while the original reaches 50 rounds (specified with ProTech gas at 20°C).
This valve also has an additional O-ring in the inner area, so the firing piston is sealed to the rear when opening and no gas can escape.
The amount of gas that can escape per shot has been adjusted so that the GBB can work without problems, but less quickly falls into the cool-down. Since there is always a leakage of O-rings, we use here a special material which is cold-resistant. This does not contract in the cold and holds up much longer. All components of our valves are made of stainless steel CNC.
The Begadi Army Armament Efficiency Valves are not available individually, but only in assembled condition in magazines or the GBBs as/where we offer them in the store. Customers who have purchased magazines or GBBs without Begadi Stainless Efficiency Valves from Begadi in the past can have the Begadi Army Armament Stainless Efficiency Valves retrofitted by our workshop upon request. This service is limited to magazines & GBBs purchased from Begadi.
Sectional drawings of the Begadi Stainless Efficiency Valves incl. material info:
Info / tip about tightness of the magazine:
It can occasionally happen that the magazines begin to hiss at the bottom when first filled with gas. This is not a defect and can be fixed with a few simple steps. In this case, please remove the magazine base and tighten the hex screw located underneath. This is sometimes not fully tightened by the manufacturer in order not to squeeze the O-rings too much and thus protect them.
Tip / useful accessories:
-BEGADI GBB loading aid for pistols
Material: Metal
Capacity: 28 BBs
Suitable for:
- Army Armament TTI Combat Master / R601 HiCapa GBB
- WE HiCapa Series
With TTI logo on the base plate !
Not recommended for use with KJW HiCapa GBBs (or KP05/KP06).
This magazine is already equipped with our Begadi Army Armament Efficiency valve made of stainless steel.
This valve, due to its smoothness and revised design, provides a much more constant energy output and reduces gas consumption by up to 20%.
For example, it is possible to fire up to 65 rounds from an R17 GBB magazine, while the original reaches 50 rounds (specified with ProTech gas at 20°C).
This valve also has an additional O-ring in the inner area, so the firing piston is sealed to the rear when opening and no gas can escape.
The amount of gas that can escape per shot has been adjusted so that the GBB can work without problems, but less quickly falls into the cool-down. Since there is always a leakage of O-rings, we use here a special material which is cold-resistant. This does not contract in the cold and holds up much longer. All components of our valves are made of stainless steel CNC.
The Begadi Army Armament Efficiency Valves are not available individually, but only in assembled condition in magazines or the GBBs as/where we offer them in the store. Customers who have purchased magazines or GBBs without Begadi Stainless Efficiency Valves from Begadi in the past can have the Begadi Army Armament Stainless Efficiency Valves retrofitted by our workshop upon request. This service is limited to magazines & GBBs purchased from Begadi.
Sectional drawings of the Begadi Stainless Efficiency Valves incl. material info:
Info / tip about tightness of the magazine:
It can occasionally happen that the magazines begin to hiss at the bottom when first filled with gas. This is not a defect and can be fixed with a few simple steps. In this case, please remove the magazine base and tighten the hex screw located underneath. This is sometimes not fully tightened by the manufacturer in order not to squeeze the O-rings too much and thus protect them.
Tip / useful accessories:
-BEGADI GBB loading aid for pistols
Review Partner