Magazine for KJW KP-13 series, 24 BBs - CO2 version - with Begadi Stainless Efficiency valve + replacement KJW exhaust valve
![Magazine for Army Armament M1911 / R28, R29, R30 & R32 series, round bottom - with Begadi Stainless Efficiency valve (26 BBs) [A60]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/b/-/b-22121254-army-gbb-magazin-m1911-kurz-mit-begadi-efficiency-ventil-orange-g.jpg)
Other interesting articles:
Type: CO2 magazine for 6mm BBs
Material: Mainly metal
Capacity: 24 BBs
Scope of delivery:
Magazine with already installed Begadi Stainless Efficiency valve + replacement outlet valve (original KJW)
Suitable for:
- KJW KP-13
This magazine is already equipped with our Begadi Efficiency Valve made of stainless steel.
This valve provides by its smoothness and the revised design for a much more constant energy output and reduces the gas consumption by up to 15%.
For example, it is possible to fire up to 55 rounds at 0.85 joules from a small 1911 GBB magazine (specified with ProTech gas at 18°C). This valve also has an additional O-ring in the inner area, so that the firing piston is sealed to the rear when it is opened and no gas can escape.
The amount of gas that can escape per shot has been adjusted so that the GBB can work without problems, but less quickly falls into the cool-down. Since there is always a leakage of O-rings, we use here a special material which is cold-resistant. This does not contract in the cold and holds up much longer. All components of our valves are made of stainless steel CNC. Due to the high pressure of CO2 we work here with a PTFE/Teflon seal which is also CNC manufactured
The Begadi Efficiency valves are not available individually, but only in assembled condition in magazines or the GBBs as/where we offer them in the store. Customers who have purchased magazines or GBBs without Begadi Stainless Efficiency Valves from Begadi in the past can have the Begadi Stainless Efficiency Valves retrofitted by our workshop on request. This service is limited to magazines & GBBs purchased from Begadi
Sectional drawings of the Begadi Stainless Efficiency Valves incl. material info:
Note on the original KJW exhaust valve supplied as a supplement:
KJW delivers their GBBs and also magazines only incl. their original exhaust valves. Therefore, for the Begadi versions of the magazines, the original KJW valves are subsequently dismantled by the Begadi workshop and replaced by the Begadi Stainless Efficiency valves. The then dismantled original KJW exhaust valve is included in the delivery (in the packaging of the magazine). We recommend keeping said original KJW valve as a backup. The outer o-rings can also be used for the Begadi Stainless Efficiency valve.
In the course of the valve replacement by the Begadi workshop, the magazines are also tested, including shot tests in the corresponding GBB. These tests occasionally result in minimal traces of use on the magazines. Unfortunately, this cannot be completely avoided during tests
Tip / useful accessories:
-BEGADI GBB loading aid for pistols
Material: Mainly metal
Capacity: 24 BBs
Scope of delivery:
Magazine with already installed Begadi Stainless Efficiency valve + replacement outlet valve (original KJW)
Suitable for:
- KJW KP-13
This magazine is already equipped with our Begadi Efficiency Valve made of stainless steel.
This valve provides by its smoothness and the revised design for a much more constant energy output and reduces the gas consumption by up to 15%.
For example, it is possible to fire up to 55 rounds at 0.85 joules from a small 1911 GBB magazine (specified with ProTech gas at 18°C). This valve also has an additional O-ring in the inner area, so that the firing piston is sealed to the rear when it is opened and no gas can escape.
The amount of gas that can escape per shot has been adjusted so that the GBB can work without problems, but less quickly falls into the cool-down. Since there is always a leakage of O-rings, we use here a special material which is cold-resistant. This does not contract in the cold and holds up much longer. All components of our valves are made of stainless steel CNC. Due to the high pressure of CO2 we work here with a PTFE/Teflon seal which is also CNC manufactured
The Begadi Efficiency valves are not available individually, but only in assembled condition in magazines or the GBBs as/where we offer them in the store. Customers who have purchased magazines or GBBs without Begadi Stainless Efficiency Valves from Begadi in the past can have the Begadi Stainless Efficiency Valves retrofitted by our workshop on request. This service is limited to magazines & GBBs purchased from Begadi
Sectional drawings of the Begadi Stainless Efficiency Valves incl. material info:
Note on the original KJW exhaust valve supplied as a supplement:
KJW delivers their GBBs and also magazines only incl. their original exhaust valves. Therefore, for the Begadi versions of the magazines, the original KJW valves are subsequently dismantled by the Begadi workshop and replaced by the Begadi Stainless Efficiency valves. The then dismantled original KJW exhaust valve is included in the delivery (in the packaging of the magazine). We recommend keeping said original KJW valve as a backup. The outer o-rings can also be used for the Begadi Stainless Efficiency valve.
In the course of the valve replacement by the Begadi workshop, the magazines are also tested, including shot tests in the corresponding GBB. These tests occasionally result in minimal traces of use on the magazines. Unfortunately, this cannot be completely avoided during tests
Tip / useful accessories:
-BEGADI GBB loading aid for pistols
Review Partner