LCT AK 105 S-AEG with Begadi CORE EFCS / Mosfet, PRO HopUp, 16:1 HRC Gears & Mamba Motor (free from 18 yrs.)
Shipping possible from the age of 18 due to age check.
Possession permitted from the age of 18. This Airsoft is subject to the prohibition of carrying!
You can see details of the shipping service providers when you are logged in.
For your orders with Begadi, we use a system based on two-step authentication, as required by law. The age of the account holder and the age of the recipient of the goods are checked.
The check is automated, convenient and GDPR-compliant! No data is stored.
Manufacturer: LCT
Importer: Begadi
System: S-AEG (= shoots only semiauto, no full auto)
Caliber: 6mm
HopUp: Yes, adjustable
Material: primarily steel and nylon fiber
Magazine capacity: approx. 130 rounds
Energy: approx. 1,5 - 1,6 J.
Total length: approx. 590 - 830mm
Weight: approx. 3300g
Barrel length: 365mm / 6,05mm
Connector system: Dean/T-connector
Gearbox: Version 3 reinforced with FSWS
Mosfet: Yes, Begadi CORE EFC system
Scope of delivery: Weapon, Magazine
PTB approval: Details see here
Technical data:
- completely made of steel and nylon fiber
- One-piece Outer Barrel made of steel
- Reproduction of gas pickup and gas tube also made of steel
- Front and rear sight, mag catch, fire selector and other small parts are made of steel
- Sling Mounts made of steel
- Stock made of steel plate (foldable)
- Handguard and handle made of nylon fiber plastic
- Side mount for optics and rails
- Steel housing with corrosion protection (scratch resistant)
- Spring change system (gearbox must be removed)
- 24mm AK thread for flashhider and silencer
- very fast response
- internal EFCS/Mosfet (Begadi CORE)
- 6,05mm tuning barrel
- 130 shot magazine included
- Begadi Mamba 30K Balanced Motor with Neodymium Magnets
- Begadi PRO FLY5 HopUp Bucking with matching Tensioner
Internals:
- Very rugged V3 Gearbox with 9mm steel ball bearings
- FSWS (Gearbox must be removed)
- Begadi HRC 16:1 steel gears with gear clip
- Steel Springguide with ball bearings
- 19,70mm Nozzle with O-Ring
- Valved CNC Aluminum Pistonhead
- Piston with 16 steel teeth
- CNC aluminum cylinderhead with two o-rings
- Stainless steel cylinder (Type C)
Motor Information:
- High Torque / Balanced Motor
- Speed: 30,000 rpm
- TPA: 19
- Torque: 5.10 Kg/cm
- Current (peak): 85A
- Magnets: Neodymium
Begadi PRO HopUp:
- This SAEG comes directly with a Begadi PRO HopUp rubber (FLY5 60°) with matching tensioner
- We recommend to use 0.28 - 0.32g BBs
- If you would like to use rather heavy BBs, we also offer the MAG (R-Hop) Bucking and 7mm systems in the bookable tuning options
Information about the installation of the Begadi Variohead:
We have not included the installation of the Begadi Variohead in the selectable options by default for this model, as the piston should also be replaced when installing the Variohead (due to AOE - 16Z piston). If the installation of the Variohead by Begadi is desired, we will be happy to offer you this through our workshop and in the course of this installation, we will be happy to address any further customization requests and further customize the LCT S-AEG for you according to your wishes
Important information about the NEBO HopUp Unit:
We are happy to install our CNC manufactured NEBO Rotary HopUp Unit incl. matching Nozzle for you. After tuning, however, original magazines can no longer be used (here LCT differs from other manufacturers).
If you wish this tuning, we will add a suitable E&L magazine to the delivery.
Information about storage:
Always disconnect the battery from the gun when it is not in use! Otherwise, your battery can be discharged by the continuous monitoring and thus take damage
- Internal EFC/Mosfet system
- Trigger via microswitch
- Mechanical safety
- Cycle monitoring (no GearJam possible)
- Battery monitoring (LiPo, LiFe, Li-Ion, NiMH)
- Battery shutdown (LiPo, LiFe, Li-Ion, NiMH)
- Fast response
- Intelligent active brake
- Also for strong batteries
- Short time loadable up to 240A
- Overvoltage protection
- Short circuit protection
- Plug & Play
- Dean / T-plug
- Semi-only, especially for Germany
- 4 years warranty
- Made in EU
Detailed information about the individual features can be found on our Begadi CORE EFCS / Mosfet Infopage .
Additionally we recommend our Begadi CORE EFCS / Mosfet Teaser, which also presents all features in detail. You can find it here. (YouTube, Begadi)
Additional information about warranty + CORE:
The above mentioned 4 years warranty refers to the complete S-AEG, not only to the function of the Begadi CORE, if the CORE Mosfet is installed. However, the same is the prerequisite for this extended warranty. If, for example, a different Mosfet is selected in the special Mosfet options (i.e. you ask us to remove the CORE and install a different Mosfet), the warranty will be reduced from 4 years to the usual 2 years. Also, the removed CORE will not be included in this case, but retained. Normally, we always include removed components, but this is explicitly not the case with the CORE - the CORE is only delivered in installed condition
Suitable batteries (examples, other batteries with the same dimensions also fit):
- Begadi "AMAX Superio" LiPo battery 11.1V 1400mAh 30/60C+ "AK Stick" -gold color-
- Begadi "AMAX" LiPo battery 11,1V 1200mAh 20C AK Short Single Stick -red-
- Begadi "AMAX" LiPo battery 11.1V 1300mAh 25C Slim / AK Single Stick -beige-
- Begadi "AMAX" LiPo battery 7.4V 1200mAh 25C -long- single stick
- Begadi "AMAX" LiPo Battery 7,4V 1300mAh 25C Slim / AK Single Stick -white-
Info about suitable AK magazines:
We have checked some magazine types for compatibility for you, to give you an indication of which magazines the model will work well with and which not so well.
- E&L AK 74N Midcap magazine, plastic (120 BBs) Fit: Has forward and rear play / Feeding: Very good
- Begadi AK74 Midcap Magazin (150 BBs) -black- Seat: Has play to all sides (wobbles strongly) / Feeding: Very good
- E&L AK12 Midcap Magazin (150 BBs) -black- Seat: Has play to the front and back / Feeding: Very good
- Begadi AK47 Midcap Waffle Magazine (150 BBs) Seat : Has slight play to all sides / Feeding: Very good
- Begadi AK Polymer / Waffle Midcap Magazine (200 BBs) Seat : Has no play and fits very well / Feeding: Very good
- E&L AK 47 Midcap magazine, metal (120 BBs) Seat : Has play to all sides (wobbles a lot) / Feeding: Very good
- Begadi AK47 Midcap magazine (150 BBs) -black- Seat : does not fit / Feeding: ---
- Begadi Sport AKM Midcap Magazine (150 BBs) orange Seat : has slight play to all sides / Feeding: Very good
- Begadi AK74 Midcap Magazine (150 BBs) -orange- Seat : Has no play and fits very well / Feeding: Very good
- Arcturus AK 12 plastic midcap magazine (30 / 135 BBs): Fit: slight play / Feeding: very good
- Arcturus AK Midcap magazine, with sight window (30 / 135 BBs): Fit: does not fit / Feeding: ---
- Arcturus AK 74 plastic midcap magazine "Classic" (30 / 135 BBs): Fit: slight play / Feeding: very good
Recommendations / info about universal attachments - for all LCT models in the Begadi assortment
Examples, comparable items often fit as well. List is for orientation
- Begadi Sport Series AK74 Skeleton Folding Stock
Fits
Fits very well
- E&L AK M Handle -brown-
- Begadi AK Charging Handle Knob "RP-1 Style"
- Begadi AK Slim Style Handle
- Begadi AK ERGO Handle
- Begadi Extended Charging Handle for AK Models
- Begadi AK74 Tactical Pistol Grip / Nylon Handle -black-
- LCT AK Folding Stock Tube (AKS, 74UN, 74MN, TXS, AK104/105)
- LCT Rubber Pad for AKS Weapons (AKS, 74UN, 74MN, AK104/105, TXS)
Recommendations / info on suitable attachments - especially for LCT AK-74 MN / AK 105
Examples, comparable items often fit as well. List is for orientation
- Begadi "B-10M Style" AK 74 Lower Handguard, long [also for AKS74N, AK74MN, AK101, AK104, AK105 etc.]
Requires
- Begadi AK Rear Sight Rail
Reviews:
- LCT AK 105 S-AEG with Begadi CORE EFCS / Mosfet, PRO HopUp, 16:1 HRC Gears & Mamba Motor Video Review (YouTube, Big Daddy Airsoft,Outdoor & survival)
Application examples - with optional attachments available:
Importer: Begadi
System: S-AEG (= shoots only semiauto, no full auto)
Caliber: 6mm
HopUp: Yes, adjustable
Material: primarily steel and nylon fiber
Magazine capacity: approx. 130 rounds
Energy: approx. 1,5 - 1,6 J.
Total length: approx. 590 - 830mm
Weight: approx. 3300g
Barrel length: 365mm / 6,05mm
Connector system: Dean/T-connector
Gearbox: Version 3 reinforced with FSWS
Mosfet: Yes, Begadi CORE EFC system
Scope of delivery: Weapon, Magazine
PTB approval: Details see here
Technical data:
- completely made of steel and nylon fiber
- One-piece Outer Barrel made of steel
- Reproduction of gas pickup and gas tube also made of steel
- Front and rear sight, mag catch, fire selector and other small parts are made of steel
- Sling Mounts made of steel
- Stock made of steel plate (foldable)
- Handguard and handle made of nylon fiber plastic
- Side mount for optics and rails
- Steel housing with corrosion protection (scratch resistant)
- Spring change system (gearbox must be removed)
- 24mm AK thread for flashhider and silencer
- very fast response
- internal EFCS/Mosfet (Begadi CORE)
- 6,05mm tuning barrel
- 130 shot magazine included
- Begadi Mamba 30K Balanced Motor with Neodymium Magnets
- Begadi PRO FLY5 HopUp Bucking with matching Tensioner
Internals:
- Very rugged V3 Gearbox with 9mm steel ball bearings
- FSWS (Gearbox must be removed)
- Begadi HRC 16:1 steel gears with gear clip
- Steel Springguide with ball bearings
- 19,70mm Nozzle with O-Ring
- Valved CNC Aluminum Pistonhead
- Piston with 16 steel teeth
- CNC aluminum cylinderhead with two o-rings
- Stainless steel cylinder (Type C)
Motor Information:
- High Torque / Balanced Motor
- Speed: 30,000 rpm
- TPA: 19
- Torque: 5.10 Kg/cm
- Current (peak): 85A
- Magnets: Neodymium
Begadi PRO HopUp:
- This SAEG comes directly with a Begadi PRO HopUp rubber (FLY5 60°) with matching tensioner
- We recommend to use 0.28 - 0.32g BBs
- If you would like to use rather heavy BBs, we also offer the MAG (R-Hop) Bucking and 7mm systems in the bookable tuning options
Information about the installation of the Begadi Variohead:
We have not included the installation of the Begadi Variohead in the selectable options by default for this model, as the piston should also be replaced when installing the Variohead (due to AOE - 16Z piston). If the installation of the Variohead by Begadi is desired, we will be happy to offer you this through our workshop and in the course of this installation, we will be happy to address any further customization requests and further customize the LCT S-AEG for you according to your wishes
Important information about the NEBO HopUp Unit:
We are happy to install our CNC manufactured NEBO Rotary HopUp Unit incl. matching Nozzle for you. After tuning, however, original magazines can no longer be used (here LCT differs from other manufacturers).
If you wish this tuning, we will add a suitable E&L magazine to the delivery.
Information about storage:
Always disconnect the battery from the gun when it is not in use! Otherwise, your battery can be discharged by the continuous monitoring and thus take damage
- Internal EFC/Mosfet system
- Trigger via microswitch
- Mechanical safety
- Cycle monitoring (no GearJam possible)
- Battery monitoring (LiPo, LiFe, Li-Ion, NiMH)
- Battery shutdown (LiPo, LiFe, Li-Ion, NiMH)
- Fast response
- Intelligent active brake
- Also for strong batteries
- Short time loadable up to 240A
- Overvoltage protection
- Short circuit protection
- Plug & Play
- Dean / T-plug
- Semi-only, especially for Germany
- 4 years warranty
- Made in EU
Detailed information about the individual features can be found on our Begadi CORE EFCS / Mosfet Infopage .
Additionally we recommend our Begadi CORE EFCS / Mosfet Teaser, which also presents all features in detail. You can find it here. (YouTube, Begadi)
Additional information about warranty + CORE:
The above mentioned 4 years warranty refers to the complete S-AEG, not only to the function of the Begadi CORE, if the CORE Mosfet is installed. However, the same is the prerequisite for this extended warranty. If, for example, a different Mosfet is selected in the special Mosfet options (i.e. you ask us to remove the CORE and install a different Mosfet), the warranty will be reduced from 4 years to the usual 2 years. Also, the removed CORE will not be included in this case, but retained. Normally, we always include removed components, but this is explicitly not the case with the CORE - the CORE is only delivered in installed condition
Suitable batteries (examples, other batteries with the same dimensions also fit):
- Begadi "AMAX Superio" LiPo battery 11.1V 1400mAh 30/60C+ "AK Stick" -gold color-
- Begadi "AMAX" LiPo battery 11,1V 1200mAh 20C AK Short Single Stick -red-
- Begadi "AMAX" LiPo battery 11.1V 1300mAh 25C Slim / AK Single Stick -beige-
- Begadi "AMAX" LiPo battery 7.4V 1200mAh 25C -long- single stick
- Begadi "AMAX" LiPo Battery 7,4V 1300mAh 25C Slim / AK Single Stick -white-
Info about suitable AK magazines:
We have checked some magazine types for compatibility for you, to give you an indication of which magazines the model will work well with and which not so well.
- E&L AK 74N Midcap magazine, plastic (120 BBs) Fit: Has forward and rear play / Feeding: Very good
- Begadi AK74 Midcap Magazin (150 BBs) -black- Seat: Has play to all sides (wobbles strongly) / Feeding: Very good
- E&L AK12 Midcap Magazin (150 BBs) -black- Seat: Has play to the front and back / Feeding: Very good
- Begadi AK47 Midcap Waffle Magazine (150 BBs) Seat : Has slight play to all sides / Feeding: Very good
- Begadi AK Polymer / Waffle Midcap Magazine (200 BBs) Seat : Has no play and fits very well / Feeding: Very good
- E&L AK 47 Midcap magazine, metal (120 BBs) Seat : Has play to all sides (wobbles a lot) / Feeding: Very good
- Begadi AK47 Midcap magazine (150 BBs) -black- Seat : does not fit / Feeding: ---
- Begadi Sport AKM Midcap Magazine (150 BBs) orange Seat : has slight play to all sides / Feeding: Very good
- Begadi AK74 Midcap Magazine (150 BBs) -orange- Seat : Has no play and fits very well / Feeding: Very good
- Arcturus AK 12 plastic midcap magazine (30 / 135 BBs): Fit: slight play / Feeding: very good
- Arcturus AK Midcap magazine, with sight window (30 / 135 BBs): Fit: does not fit / Feeding: ---
- Arcturus AK 74 plastic midcap magazine "Classic" (30 / 135 BBs): Fit: slight play / Feeding: very good
Recommendations / info about universal attachments - for all LCT models in the Begadi assortment
Examples, comparable items often fit as well. List is for orientation
- Begadi Sport Series AK74 Skeleton Folding Stock
- (can be used as spare part for example). Fits any LCT of the AKS family (AKS-74U, AKS-74, AK-104/105 etc.). Supplied pin fits but may have minimal play, LCT pin does not fit (diameter too large). Stock joint would have to be minimally enlarged / drilled out or extended with a file.
- Fits LCT AKs and sits tight. There may be a small gap between body and grip (approx. 1mm), depending on manufacturing tolerance. No adjustments necessary.
Fits
- very well on all LCT AKS series. No adjustments necessary.
Fits very well
- on all LCT AKS series. No adjustments necessary.
- Threads are the same as well as adapter is included, so it can be used original as
- well
- Threads are the same as well as adapter is included, so it can be used original as
- E&L AK M Handle -brown-
- Begadi AK Charging Handle Knob "RP-1 Style"
- Begadi AK Slim Style Handle
- Begadi AK ERGO Handle
- Begadi Extended Charging Handle for AK Models
- Begadi AK74 Tactical Pistol Grip / Nylon Handle -black-
- LCT AK Folding Stock Tube (AKS, 74UN, 74MN, TXS, AK104/105)
- LCT Rubber Pad for AKS Weapons (AKS, 74UN, 74MN, AK104/105, TXS)
Recommendations / info on suitable attachments - especially for LCT AK-74 MN / AK 105
Examples, comparable items often fit as well. List is for orientation
- Begadi "B-10M Style" AK 74 Lower Handguard, long [also for AKS74N, AK74MN, AK101, AK104, AK105 etc.]
- Fits well, partially the outer barrel has to be loosened a bit for a clean fit.
Front receiver can have minimal play, is very fixable with armor tape or a piece of rubber/bicycle inner tube.
Requires
- B-10(M) handguard. Fits very well, rear sight is still usable! No adjustments necessary.
- Can also be mounted to B-10(M) handguard, but is short of distance to upper handguard. No adjustments necessary. Actually only for B11 handguard, but fits B-10(M) as well.
- Fits very well, nothing
- This combination fits all normal AK sizes (= no AKSU)
- Mounting info regarding sight spring must also be noted here, similar to Cyma
- Mounting info regarding sight spring must also be considered here, similar to Cyma.
- the arms in front sometimes need minimal adjustment, is not always the case similar to Cyma behaving
- Begadi AK Rear Sight Rail
Reviews:
- LCT AK 105 S-AEG with Begadi CORE EFCS / Mosfet, PRO HopUp, 16:1 HRC Gears & Mamba Motor Video Review (YouTube, Big Daddy Airsoft,Outdoor & survival)
Application examples - with optional attachments available:
Review Partner