Gaskets / seals set for maintenance of the Begadi HPA system (complete)
Would you like to carry out maintenance on your Begadi HPA Engine yourself?
Then we offer you all the necessary seals (O-rings) as a set.
Included is:
1x HPA-S-FR (front seal)
2x O-ring (3.5x1mm)
1x O-ring (4x1mm)
2x O-ring (5x1mm)
6x O-ring (6x1.5mm)
2x O-ring (12x1.5mm)
5x O-ring (19x1.5mm)
6x O-ring (6x1.5mm)
2x O-ring (3.5x1mm)
More O-rings are included than are required for the engine. One set is therefore sufficient for over 200,000 shots.
In the long-term test, both 6x1mm O-rings on the inner flow tube had to be replaced after 120,000 shots (this corresponds to 120 playing days with 1000 shots each).
We have created an overview for you of where which seals are installed. A large version of this overview graphic can be downloaded here:
- Downloadoverview graphic
You will also find a smaller version of the overview as the last store image included in the offer
The item shown above is a tested accessory for our HPA system. Barrels were used for a long time during development and tested for function
Further interesting articles and information about our HPA system
- Begadi "TAIFUN" HPA/CO2 Regulators
- Begadi "HURRICANE" HPA/CO2 Regulators for Begadi HPA System
- Tappet Plate for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA system (screws, Springs, pins, connector)
Maintenance of the Begadi HPA system:
Tip: Download overview graphic in large size
Then we offer you all the necessary seals (O-rings) as a set.
Included is:
1x HPA-S-FR (front seal)
2x O-ring (3.5x1mm)
1x O-ring (4x1mm)
2x O-ring (5x1mm)
6x O-ring (6x1.5mm)
2x O-ring (12x1.5mm)
5x O-ring (19x1.5mm)
6x O-ring (6x1.5mm)
2x O-ring (3.5x1mm)
More O-rings are included than are required for the engine. One set is therefore sufficient for over 200,000 shots.
In the long-term test, both 6x1mm O-rings on the inner flow tube had to be replaced after 120,000 shots (this corresponds to 120 playing days with 1000 shots each).
We have created an overview for you of where which seals are installed. A large version of this overview graphic can be downloaded here:
- Downloadoverview graphic
You will also find a smaller version of the overview as the last store image included in the offer
The item shown above is a tested accessory for our HPA system. Barrels were used for a long time during development and tested for function
Further interesting articles and information about our HPA system
- Begadi "TAIFUN" HPA/CO2 Regulators
- Begadi "HURRICANE" HPA/CO2 Regulators for Begadi HPA System
- Tappet Plate for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA system (screws, Springs, pins, connector)
Maintenance of the Begadi HPA system:
Tip: Download overview graphic in large size
Review Partner