Tappet Plate for Begadi HPA System -SVD / SVU Version-
Other interesting articles:
Reinforced Tappet Plate, suitable for the Begadi HPA system.
Made from very robust technopolymer with fiber content.
This achieves a very high tensile strength, but still has sufficient flexibility to prevent breakage.
Installation instructions:
When selecting the correct Tappet Plates, you should use the original that was/is installed on delivery as a guide. Whether the Tappet Plate is fitted with an O-ring or without an O-ring, and which version was fitted.
Properties:
Material: Technopolymer with fiber content
Gearbox: SVD / SVU (only suitable for the Begadi HPA system)
Length: 64 mm
Width: 13,3 mm
The item shown above is a tested accessory for our HPA system. Barrels were used for a long time during development and tested for function
Further interesting articles and information about HPA systems
- Begadi HPA seals for system maintenance (complete)
- Tappet Plates for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA system (screws, Springs, pins, connector)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details1.jpg)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details2.jpg)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details3.jpg)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details4.jpg)
Made from very robust technopolymer with fiber content.
This achieves a very high tensile strength, but still has sufficient flexibility to prevent breakage.
Installation instructions:
When selecting the correct Tappet Plates, you should use the original that was/is installed on delivery as a guide. Whether the Tappet Plate is fitted with an O-ring or without an O-ring, and which version was fitted.
Properties:
Material: Technopolymer with fiber content
Gearbox: SVD / SVU (only suitable for the Begadi HPA system)
Length: 64 mm
Width: 13,3 mm
The item shown above is a tested accessory for our HPA system. Barrels were used for a long time during development and tested for function
Further interesting articles and information about HPA systems
- Begadi HPA seals for system maintenance (complete)
- Tappet Plates for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA system (screws, Springs, pins, connector)
![line](/media/begadi_img/line_fade_grey.webp)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details1.jpg)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details2.jpg)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details3.jpg)
![](/catalog/images/b-26523913-begadi-hpa-svd-tappet-plate-details4.jpg)