E&L AKM "Diamond+ Series" Semi AEG with Begadi CORE EFCS / Mosfet (18+)
Shipping possible from the age of 18 due to age check.
Possession permitted from the age of 18. This Airsoft is subject to the prohibition of carrying!
You can see details of the shipping service providers when you are logged in.
For your orders with Begadi, we use a system based on two-step authentication, as required by law. The age of the account holder and the age of the recipient of the goods are checked.
The check is automated, convenient and GDPR-compliant! No data is stored.
Importer: Begadi
System: Semi AEG (= shoots only semi-auto, no full auto)
Caliber: 6mm
HopUp: Yes, adjustable
Material: Primarily steel and wood
Magazine capacity: approx. 120 rounds
Energy: approx. 1.5 - 1.6 J.
Total length: approx. 890mm
Weight : approx. 3780g
Barrel length: 455mm / 6.04mm
Plug system: Dean/T-plug
Gearbox: Version 3 reinforced with QSX
Scope of delivery: Weapon, magazine, certificate with chrono protocol, container for e.g. BBs
PTB approval: Details see here
Technical data:
- completely made of steel and real wood
- One-piece outer barrel made of steel
- Reproduced gas take-off and gas tube also made of steel
- Front and Rear Sight, Mag Catch, Fire Selector and other small parts are made of steel
- Handguard and Stock are made of real wood
- Steel housing with corrosion protection (scratch-resistant)
- Rear sight adjustable in height
- Spring change system
- 14mm CCW (negative) thread for Flashhider and Silencer
- very good response behavior
- internal EFCS/Mosfet (Begadi CORE)
- very robust V3 Gearbox Shell with QSX
- 9mm Bearing and Bushings
- solid 18:1 steel Gears with Gear Clip
- High Torque Motor with neodymium magnets
- Steel Springguide with plastic coating
- CNC-machined aluminum Pistonheads with Bearing and two O-rings
- Lightweight Piston with 15 steel teeth
- Nozzle with O-ring and a length of 20.6 mm
- Stainless steel Cylinder
- Metal HopUp Unit
- 6.04mm tuning barrel
- Maple Leaf Omega Tensioner (Bucking is standard E&L)
- 120 round magazine is included in the scope of delivery
Details on Diamond and Diamond+ series:
This series is the latest version on the market. Compared to the previous models, all weak points have been eliminated in order to offer our customers a perfectly functioning and durable system.
The Diamond series comes with a Begadi CORE EFCS ex works and can therefore use 11.1V LiPos without hesitation. The internals have also been revised. In addition to the Lightweight Piston with complete steel teeth, the Diamond series also features a new CNC aluminum Pistonheads. The 6.04mm tuning barrel rounds off the system
Diamond+ series:
The steel Cylinder has been replaced by a polished stainless steel Cylinder, a CNC machined aluminum Cylinderheads with two O-rings is installed and all guns with a short Barrel have a Short Stroke Gears Set.
Storage information:
Always disconnect the battery from the gun when it is not in use! Otherwise your battery may be discharged by the continuous monitoring and thus be damaged
- Internal EFC/Mosfet system
- Trigger via microswitch
- Mechanical fuse
- Cycle monitoring (no GearJam possible)
- Battery monitoring (LiPo, LiFe, Li-Ion, NiMH)
- Battery cut-off (LiPo, LiFe, Li-Ion, NiMH)
- Fast response behavior
- Intelligent active brake
- Also for powerful batteries
- Short-term load capacity up to 240A
- Overvoltage protection
- Protection against short circuit
- Plug & Play
- Dean / T-plug
- Semi-only, especially for Germany
- 4-year warranty
- Made in EU
Detailed information on the individual features can be found on our Begadi CORE EFCS / Mosfet info page .
In addition, we recommend our Begadi CORE EFCS / Mosfet teaser, in which all features are also presented in detail. You can find it here. (YouTube, Begadi)
Additional information on the warranty + Core:
The 4-year warranty mentioned above refers to the complete Semi AEG when the CORE Mosfet is installed, not just to the function of the Begadi CORE. However, this is the prerequisite for this extended warranty. If, for example, a different Mosfet is selected in the bookable special options in the Mosfet area (i.e. you ask us to remove the CORE and install a different Mosfet instead), the warranty is reduced from 4 years to the usual 2 years. In this case, the removed Core will not be included in the delivery but retained. Normally, we always include removed components, but this is expressly not the case with the CORE - the CORE is only delivered in an installed state
Suitable batteries with original Stock: (examples, other batteries with the same dimensions also fit)
Required connection: Dean
- Begadi "AMAX" LiPo battery 11,1V 1300mAh 25C Slim / AK Single Stick -beige-
- Begadi "AMAX" LiPo battery 7,4V 1200mAh 25C -long- single stick
- Begadi "AMAX" LiPo battery 7,4V 1300mAh 25C Slim / AK Single Stick -white-
- Begadi "AMAX" LiPo battery 11,1V 1200mAh 20C AK Single Stick -gray-
- Begadi "AMAX" LiPo battery 11,1V 1200mAh 20C AK Short Single Stick with Dean -red-
- Begadi "AMAX" LiPo battery 7,4V 1200mAh 20C AK Short Single Stick with Dean -red-
- Begadi "AMAX Superio" LiPo battery 11,1V 1400mAh 30/60C+ "AK Stick" with Dean -gold colored-
Information on suitable AK magazines:
We recommend the use of the following AK magazines:
- E&L AK 47 Midcap magazine, metal (120 BBs): fit very well and feed very well
- E&L AK 74N Midcap magazine, plastic -black- (120 BBs): fits very well and feeds very well
- E&L AK 74N Midcap magazine, synthetic -brown- (120 BBs) : fits very well and feeds very well
- E&L AK 74N Midcap magazine, plastic-orange- (120 BBs) : fits very well and feeds very well
- Begadi AK74 Midcap magazine (150 BBs) -black- : fits well and feeds very well
- Arcturus AK 12 plastic midcap magazine (30 / 135 BBs): Seating: very good / feeding: very good
- Arcturus AK Midcap magazine, with window (30 / 135 BBs): Fit: very good / Feeding: very good
- Arcturus AK 74 plastic midcap magazine "Classic" (30 / 135 BBs): Fit: very good / Feeding: very good
Tip if the Begadi magazines do not lock into your E&L AK:
The front magazine catch must be slightly flattened at the top (approx. 1mm) because it is too "thick" to be able to lock into the AK magazine well. The problem only exists in isolated cases (tolerances during production by E&L)
Exploded view
- E&L AKM "Diamond Series" Semi AEG exploded view (PDF)
Videos & Reviews
- E&L AKM "Diamond Series" Semi AEG Video Review (YouTube, Highlander) - old version without CORE
- E&L Diamond Series Combi Review M4 / AK [AK74, M4 MUR] (YouTube, REAPERs Airsoft)
- E&L AKM "Diamond Series" Semi AEG Video Review (YouTube, TEAM-030- AIRSOFT) - old version without CORE
- E&L AKM "Diamond+ Series" Semi AEG with Begadi CORE EFCS / Mosfet Text + Video Review (German, rapax.net)
- E&L AKM "Diamond+ Series" Semi AEG with Begadi CORE EFCS / Mosfet Video Review (YouTube, Tom's Airsoft Channel)
Further accessories:
Begadi HopUp Support for E&L AK models