Begadi Tracer Modul für Supersonic Modular Silencer inkl. Adapter
This tracer unit is specifically for our Supersonic Silencer series,
developed and suitable for:
- Begadi Supersonic 9/45 Aluminium Modular Silencer
- Begadi Supersonic 556 Modular Silencer made of aluminum
- Begadi Supersonic 762 Modular Silencer made of aluminum
If you own a silencer dummy with the same inner dimensions, the tracer can also be used here.
Three matching adapters are included with the unit:
Adapter 1 with an outer diameter of 25.90mm (Supersonic 9/45)
Adapter 2 with an outer diameter of 31.90mm (Supersonic 556)
Adapter 3 with an outer diameter of 37.90mm (Supersonic 762)
The tracer unit is installed in the corresponding adapter and together inserted into the muffler dummy.
Adapter 1 = aluminum cover must be used in all cases!
All tracer units with a diameter of 25mm can be used, includingourBegadi Spitfire MK-1 tracer.
As soon as the BB reaches the front light barrier of the unit, it is illuminated by the ultra-bright UV LEDs.
All green Tracer BBs can be used.
With the built-in lithium battery, up to 30,000 BBs can be fired. A charging process of just 5 minutes is enough for another 1000 BBs. To charge the Tracer, it must be removed from the silencer. Now the USB socket is open for the charging process. A USB cable is included in the delivery.
If the tracer is not used, it automatically switches to standby after 5 minutes.
Please note: The Tracer module must always be placed in the silencer as close as possible to the barrel - directly in the first element. If you place the Tracer module in the silencer too far away from the barrel, it could be damaged.
Features:
- Made of aluminum/plastic
- Very compact tracer
- Integrated motion sensor
- automatic shutdown/standby
- High power UV LED technology
- 6 LEDs illuminate the BB from two sides
- One fully charged battery lasts for up to 30000 shots
- Up to 35 BBs per second (2100 RPM) can be illuminated
- Built-in lithium battery with USB charging port
- Integrated charge level indicator (via LED)
- Protection against deep discharge
- The Tracer can also be inserted into the shells of other silencers
- suitable for green Tracer BBs, for other colors the brightness may vary
- In case of longer storage it is recommended to charge the battery every 3 months
Operation:
- turn on the tracer via the rear button. The green LED will now light up slightly every 4 seconds
- press and hold the button for 2 seconds = tracer will be deactivated/activated
LED on button (battery indicator):L
- green flashing = battery fully charged and unit switched on
- red flashing = battery is low
- red light = battery is empty
Scope of delivery:
- Tracer Unit incl. LiIon battery
- USB charging cable
- Adapter with 25,90mm outer diameter
- Adapter with 31,90mm outer diameter
- Adapter with 37,90mm outer diameter
Adaptations to use the Tracer also in AK PBS-1 & PBS-1 Mini:
The smaller tracer adapter needs to be narrowed a bit, then it will also fit in a PBS Airsoft Silencer.
Begadi AK PBS Silencer inner diameter is about 31.75mm, the adapter from the Tracer has an outer diameter of about 31.9mm.
Reviews:
- Begadi Tracer module for Supersonic Modular Silencer incl. adapter Video Review, french (YouTube, Golgy, a sunday gamer)
- Begadi Tracer Module for Supersonic Modular Silencer incl. Adapter Video Review, french (YouTube, ScarFab94)
developed and suitable for:
- Begadi Supersonic 9/45 Aluminium Modular Silencer
- Begadi Supersonic 556 Modular Silencer made of aluminum
- Begadi Supersonic 762 Modular Silencer made of aluminum
If you own a silencer dummy with the same inner dimensions, the tracer can also be used here.
Three matching adapters are included with the unit:
Adapter 1 with an outer diameter of 25.90mm (Supersonic 9/45)
Adapter 2 with an outer diameter of 31.90mm (Supersonic 556)
Adapter 3 with an outer diameter of 37.90mm (Supersonic 762)
The tracer unit is installed in the corresponding adapter and together inserted into the muffler dummy.
Adapter 1 = aluminum cover must be used in all cases!
All tracer units with a diameter of 25mm can be used, includingourBegadi Spitfire MK-1 tracer.
As soon as the BB reaches the front light barrier of the unit, it is illuminated by the ultra-bright UV LEDs.
All green Tracer BBs can be used.
With the built-in lithium battery, up to 30,000 BBs can be fired. A charging process of just 5 minutes is enough for another 1000 BBs. To charge the Tracer, it must be removed from the silencer. Now the USB socket is open for the charging process. A USB cable is included in the delivery.
If the tracer is not used, it automatically switches to standby after 5 minutes.
Please note: The Tracer module must always be placed in the silencer as close as possible to the barrel - directly in the first element. If you place the Tracer module in the silencer too far away from the barrel, it could be damaged.
Features:
- Made of aluminum/plastic
- Very compact tracer
- Integrated motion sensor
- automatic shutdown/standby
- High power UV LED technology
- 6 LEDs illuminate the BB from two sides
- One fully charged battery lasts for up to 30000 shots
- Up to 35 BBs per second (2100 RPM) can be illuminated
- Built-in lithium battery with USB charging port
- Integrated charge level indicator (via LED)
- Protection against deep discharge
- The Tracer can also be inserted into the shells of other silencers
- suitable for green Tracer BBs, for other colors the brightness may vary
- In case of longer storage it is recommended to charge the battery every 3 months
Operation:
- turn on the tracer via the rear button. The green LED will now light up slightly every 4 seconds
- press and hold the button for 2 seconds = tracer will be deactivated/activated
LED on button (battery indicator):L
- green flashing = battery fully charged and unit switched on
- red flashing = battery is low
- red light = battery is empty
Scope of delivery:
- Tracer Unit incl. LiIon battery
- USB charging cable
- Adapter with 25,90mm outer diameter
- Adapter with 31,90mm outer diameter
- Adapter with 37,90mm outer diameter
Adaptations to use the Tracer also in AK PBS-1 & PBS-1 Mini:
The smaller tracer adapter needs to be narrowed a bit, then it will also fit in a PBS Airsoft Silencer.
Begadi AK PBS Silencer inner diameter is about 31.75mm, the adapter from the Tracer has an outer diameter of about 31.9mm.
Reviews:
- Begadi Tracer module for Supersonic Modular Silencer incl. adapter Video Review, french (YouTube, Golgy, a sunday gamer)
- Begadi Tracer Module for Supersonic Modular Silencer incl. Adapter Video Review, french (YouTube, ScarFab94)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details1.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details2.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details3.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details4.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details5.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details6.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details7.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details8.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details9.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details10.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details11.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details12.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details13.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details14.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details15.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details16.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details17.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details18.jpg)
![](/catalog/images/b-00821110-tracer-modul-fuer-begadi-supersonic-serie-details19.jpg)