Begadi PRO SMG MOD 5 Midcap Magazine (140 BBs)
Our Begadi PRO Magazine is a high-quality MidCap Magazine with optimized feeding and innovative features. The outer shell and magazine base are made of robust polyamide with fiberglass to reduce damage. The design means that the BBs inside are partially visible. This means you can always see whether the magazine is completely full (bottom window), half full (top view) or almost empty (side window).
The surface has been manufactured with a fine grain so that the magazine can be gripped securely and firmly in any situation.
The magazine can be customized using the two windows in the lower area (can optionally be closed with the enclosed covers). Labels, stickers or lettering such as a name or ball grammage can be attached here. Or it can be left open as a viewing window to see the maximum fill level.
In order to optimize feeding with heavier BBs, we tested a large number of Springs with different lengths and materials in advance. An optimized Begadi PRO - Super Feed Spring made of pure spring steel is used. This delivers more force (with the same size and length) compared to conventional stainless steel Springs.
To prevent the spring from wearing out due to overfilling of the magazine, an extra-long Springguide is installed, on which all coils of the Spring are carefully wound, thus protecting the spring. The magazine is very easy to remove for maintenance and cleaning.
Features:
- Capacity: 140 BBs
- made from composite material with glass fiber content
- Filling level partially visible
- high-contrast follower
- Window for customization (can be optionally closed)
- Begadi PRO Super Feed Spring
- optimized Springguide
- easy to clean/maintain
Maintenance and cleaning: (Important)
In order to guarantee a reliable ball feed, our magazine should also be cleaned/maintained regularly (4 - 5 playing days). Please note the material of the Super Feed Spring! (spring steel). As with all spring steel, excessive moisture in the magazine can cause it to rust! Store your magazines in a dry place. If it comes into contact with water, remove the Spring, dry it and re-oil it. We also recommend wetting the Spring with silicone oil from time to time to maintain friction-free operation and protect the material.
We have tested the magazines for feeding with different guns and HopUp systems:
(* = Important information on this weapon can be found below the table)
Further information on the individual guns:
* If there are occasional empty shots with 0.40g BBs, this may be due to a Spring that is too dry. In this case, the Spring should be re-lubricated with a thin film of silicone oil.
* Cyma/Begadi CRP-9: The magazine sits tightly in the magazine well and can be damaged in the upper area. We currently advise against using it.
Feeding:
A good magazine is important to avoid feeding problems. However, a magazine is only part of the solution; the HopUp Unit, Bucking, Nozzle, timing and a reasonable bullet weight should also be taken into account to prevent feeding problems. If you notice that your Begadi PRO magazine suddenly no longer feeds well, carry out maintenance as described above. Use very little silicone oil in the magazine and on the Spring! A light wetting (thin film) of the parts is sufficient. The magazine must not be soaked. Otherwise your HopUp will lose performance after maintenance and must be shot "dry".
Accessories:
- Begadi PRO Super Feed Magazine Spring
- Spare part set for Begadi PRO SMG MOD 5 Magazine
- Transparent window for Begadi PRO SMG MOD 5 Magazine
Video of the Begadi PRO SMG MOD 5 MidCap magazine:
00:00 Scope of delivery, 00:43 Covering the windows, 02:33 Disassembly, 04:21 Maintenance/cleaning
Video on labeling/individualization
Exterior views (complete) of the Begadi PRO SMG MOD 5 Midcap magazine:
Exterior views (details) of the Begadi PRO SMG MOD 5 Midcap magazine:
Interior views of the Begadi PRO SMG MOD 5 Midcap magazine:
Application examples with customization using transparent magazine window:
Application examples on weapon / visual appearance:
The magazine can be customized using the two windows in the lower area (can optionally be closed with the enclosed covers). Labels, stickers or lettering such as a name or ball grammage can be attached here. Or it can be left open as a viewing window to see the maximum fill level.
In order to optimize feeding with heavier BBs, we tested a large number of Springs with different lengths and materials in advance. An optimized Begadi PRO - Super Feed Spring made of pure spring steel is used. This delivers more force (with the same size and length) compared to conventional stainless steel Springs.
To prevent the spring from wearing out due to overfilling of the magazine, an extra-long Springguide is installed, on which all coils of the Spring are carefully wound, thus protecting the spring. The magazine is very easy to remove for maintenance and cleaning.
Features:
- Capacity: 140 BBs
- made from composite material with glass fiber content
- Filling level partially visible
- high-contrast follower
- Window for customization (can be optionally closed)
- Begadi PRO Super Feed Spring
- optimized Springguide
- easy to clean/maintain
Maintenance and cleaning: (Important)
In order to guarantee a reliable ball feed, our magazine should also be cleaned/maintained regularly (4 - 5 playing days). Please note the material of the Super Feed Spring! (spring steel). As with all spring steel, excessive moisture in the magazine can cause it to rust! Store your magazines in a dry place. If it comes into contact with water, remove the Spring, dry it and re-oil it. We also recommend wetting the Spring with silicone oil from time to time to maintain friction-free operation and protect the material.
We have tested the magazines for feeding with different guns and HopUp systems:
(* = Important information on this weapon can be found below the table)
| Gun: | Fit: | 0.20g BBs | 0.32g BBs | 0.40g BBs |
| Begadi/Cyma MOD 5K | very good | very good | good* | / |
| Begadi/Cyma MOD 5 series | very good | very good | very good | good* |
| Begadi/Cyma MOD 5 (with MPAX) | very good | very good | very good | very good |
| ICS MX5-P | does not fit | / | / | / |
| JG MOD5 K | very good | very good | very good | conditional* |
| JG MOD5 Series | very good | good* | good* | Blank shots |
| Begadi/Cyma CRP-9 | tight* | / | / | / |
| Golden Eagle MOD5 (0.5J.) | very good | very good | good* | / |
Further information on the individual guns:
* If there are occasional empty shots with 0.40g BBs, this may be due to a Spring that is too dry. In this case, the Spring should be re-lubricated with a thin film of silicone oil.
* Cyma/Begadi CRP-9: The magazine sits tightly in the magazine well and can be damaged in the upper area. We currently advise against using it.
Feeding:
A good magazine is important to avoid feeding problems. However, a magazine is only part of the solution; the HopUp Unit, Bucking, Nozzle, timing and a reasonable bullet weight should also be taken into account to prevent feeding problems. If you notice that your Begadi PRO magazine suddenly no longer feeds well, carry out maintenance as described above. Use very little silicone oil in the magazine and on the Spring! A light wetting (thin film) of the parts is sufficient. The magazine must not be soaked. Otherwise your HopUp will lose performance after maintenance and must be shot "dry".
Accessories:
- Begadi PRO Super Feed Magazine Spring
- Spare part set for Begadi PRO SMG MOD 5 Magazine
- Transparent window for Begadi PRO SMG MOD 5 Magazine
Video of the Begadi PRO SMG MOD 5 MidCap magazine:
00:00 Scope of delivery, 00:43 Covering the windows, 02:33 Disassembly, 04:21 Maintenance/cleaning
Video on labeling/individualization
Exterior views (complete) of the Begadi PRO SMG MOD 5 Midcap magazine:
Exterior views (details) of the Begadi PRO SMG MOD 5 Midcap magazine:
Interior views of the Begadi PRO SMG MOD 5 Midcap magazine:
Application examples with customization using transparent magazine window:
Application examples on weapon / visual appearance:
Review Partner