Begadi PRO AR15 / M4 Midcap Magazine (150 BBs) -black-
Other interesting articles:
Our Begadi PRO Magazine is a high-quality MidCap magazine with optimized feeding and innovative features. The outer shell and magazine base are made of robust polyamide, reinforced with fiberglass to reduce damage. The design means that the BBs inside are partially visible. This means you can always see whether the magazine is completely full (bottom window), half full (top view) or almost empty (side window).
The surface has been manufactured with a fine grain so that the magazine can be gripped securely and firmly in any situation.
The magazine can be customized using the two windows in the lower area (can optionally be closed with the enclosed covers). Labels, stickers or labeling such as name, number or ball grammage can be attached here. Or it can be left open as a viewing window to see the maximum fill level.
In order to optimize feeding with heavier BBs, we tested a large number of Springs with different lengths and materials in advance. An optimized Begadi PRO - Super Feed Spring made of pure spring steel is used. This delivers more force (with the same size and length) compared to conventional stainless steel Springs.
To prevent the spring from wearing out due to overfilling of the magazine, an extra-long Springguide is installed, on which all coils of the Spring are carefully wound, thus protecting the spring. The magazine is very easy to remove for maintenance and cleaning.
Features:
- Capacity: 150 BBs
- made from composite polyamide with glass fiber content
- filling level partially visible
- high-contrast follower
- window for customization (can be optionally closed)
- Begadi PRO Super Feed Spring
- optimized Springguide
- easy to clean/maintain
- available in 3 color variants
Maintenance and cleaning: (Important)
In order to guarantee a reliable ball feed, our magazine should also be cleaned/maintained regularly (4 - 5 playing days). Please pay attention to the material of the Super Feed Springs (spring steel)! As with all spring steel, excessive moisture in the magazine can cause it to rust! Store your magazines in a dry place. If it comes into contact with water, remove the Spring, dry it and re-oil it. We also recommend wetting the spring with silicone oil from time to time to maintain friction-free operation and protect the material.
We have tested the magazines for feeding with different guns and HopUp systems:
(* = Important information on this weapon can be found below the table)
Further information on the individual guns:
* If there are occasional empty shots with 0.40g BBs, this may be due to the Spring being too dry. In this case, the Spring should be re-lubricated with a thin film of silicone oil.
** Cyma / Begadi SCAR-L and SCAR-SC: The original HopUp unit is only partially compatible with standard HopUp Buckings. (Lip too long and slows down the BBs) A clean feeding was only possible with our Begadi FYL5 Short Bucking. Alternatively, an FNS HopUp unit should be considered.
E&C guns with Neptun HopUp Unit: Please note the correct setting of the Neptun. With the original Nozzle 4 shims must be used, the loading channel must be turned out 1.5 mm.
ICS guns with Neptun HopUp Unit: Please note the correct setting of the Neptun. With the original Nozzle 4 shims must be used, the loading channel must be turned out 2 mm.
S&T T21: The magazine sits in the gun without adjustment and without play, but slightly touches the Body. If you want to optimize this, 1 mm of material can be removed from the rear surfaces.
Feeding:
A good magazine is important to avoid feeding problems. However, a magazine is only part of the solution; the HopUp unit, Bucking, Nozzle, timing and a reasonable bullet weight should also be taken into account, to prevent feeding problems. If you notice that your Begadi PRO magazine suddenly no longer feeds well, carry out maintenance as described above. Use very little silicone oil in the magazine and on the Spring! A light wetting (thin film) of the parts is sufficient. The magazine must not be soaked. Otherwise your HopUp will lose performance after maintenance and must be shot "dry"
Accessories:
- Begadi PRO Super Feed Magazine Spring
- Spare part set for Begadi PRO AR15 / M4 Magazine
- Transparent window for Begadi PRO AR15 / M4 Magazine
- BB Limiter for Begadi PRO Midcap Magazines
Video of the Begadi PRO AR15 MidCap Magazine:
00:00 Scope of delivery, 01:42 Covering the windows, 04:10 Disassembly
05:38 Maintenance/cleaning, 11:12 Applying stickers to the smoke version
Video for labeling/individualization
Exterior views (complete) of the Begadi PRO AR15 / M4 Midcap magazine:
Exterior views (details) of the Begadi PRO AR15 / M4 Midcap magazine:
Interior views of the Begadi PRO AR15 / M4 Midcap magazine:
Application examples with individualization by means of transparent magazine window:
Application examples on weapon / visual appearance:
The magazine can be customized using the two windows in the lower area (can optionally be closed with the enclosed covers). Labels, stickers or labeling such as name, number or ball grammage can be attached here. Or it can be left open as a viewing window to see the maximum fill level.
In order to optimize feeding with heavier BBs, we tested a large number of Springs with different lengths and materials in advance. An optimized Begadi PRO - Super Feed Spring made of pure spring steel is used. This delivers more force (with the same size and length) compared to conventional stainless steel Springs.
To prevent the spring from wearing out due to overfilling of the magazine, an extra-long Springguide is installed, on which all coils of the Spring are carefully wound, thus protecting the spring. The magazine is very easy to remove for maintenance and cleaning.
Features:
- Capacity: 150 BBs
- made from composite polyamide with glass fiber content
- filling level partially visible
- high-contrast follower
- window for customization (can be optionally closed)
- Begadi PRO Super Feed Spring
- optimized Springguide
- easy to clean/maintain
- available in 3 color variants
Maintenance and cleaning: (Important)
In order to guarantee a reliable ball feed, our magazine should also be cleaned/maintained regularly (4 - 5 playing days). Please pay attention to the material of the Super Feed Springs (spring steel)! As with all spring steel, excessive moisture in the magazine can cause it to rust! Store your magazines in a dry place. If it comes into contact with water, remove the Spring, dry it and re-oil it. We also recommend wetting the spring with silicone oil from time to time to maintain friction-free operation and protect the material.
We have tested the magazines for feeding with different guns and HopUp systems:
(* = Important information on this weapon can be found below the table)
| Gun: | Fit: | 0.20g BBs | 0.32g BBs | 0.40g BBs |
| E&C M4 Spodmod SD (0.5J.) | light action | very good | very good | / |
| Golden Eagle M4C16 (0.5J.) | easy play | very good | very good | / |
| Golden Eagle M4 Keymod (0.5J.) | easy game | very good | very good | / |
| Lonex L4 Rocket (0.5J.) | very good | very good | very good | / |
| Begadi/Cyma M4 ECO (0.5Y.) | very good | very good | very good | / |
| Begadi/Cyma M4 series (0.5Y.) | little play | very good | very good | / |
| Begadi/Cyma M4 Keymod (0.5J.) | very good | very good | very good | / |
| Begadi HW4 | some play | very good | very good | limited* |
| Begadi/Cyma NOVA series | very good | very good | very good | good* |
| Begadi/Cyma M4A1 | very good | very good | very good | good* |
| Begadi/Cyma MK18 | very good | very good | very good | good* |
| Begadi/Cyma MK16 SCAR | very good* | very good* | very good* | good* |
| Begadi/Cyma MK16 SCAR (FNS HopUp) | very good | very good | very good | very good* |
| Arcturus AR15 E3 | very good | very good | very good | very good |
| Arcturus AR15 CQB | very good | very good | very good | very good |
| Arcturus M4 Hybrid | very good | very good | very good | very good |
| Arcturus SWORD VG | very good | very good | very good | very good |
| ICS Sirius FALCON | easy game | very good | very good | good* |
| ICS Sirius Falcon (Neptune HopUp) | easy game | very good | very good | very good |
| ICS Sirius Crow | easy game | very good | very good | good* |
| ICS Sirius Crow (Neptune HopUp) | easy game | very good | very good | very good |
| Slong M4 | Forward play | bad | bad | bad |
| E&C BC-9 | easy game | very good | very good | good* |
| E&C BC-9 (Neptune HopUp) | very good | very good | very good | very good* |
| E&C SMR16 | wobbles sideways | very good | very good | good* |
| E&C SMR16 (Neptun HopUp) | very good | very good | very good | very good* |
| S&T T21 | very good* | very good | very good | good* |
| S&T T21 (Neptun HopUp) | very good* | very good | very good | very good |
| A&K MSK (Alt) | easy play | very good | good* | limited* |
| A&K MSK (New) | light play | very good | good* | conditional* |
| VFC XCR | jams easily | very good | very good | very good |
Further information on the individual guns:
* If there are occasional empty shots with 0.40g BBs, this may be due to the Spring being too dry. In this case, the Spring should be re-lubricated with a thin film of silicone oil.
** Cyma / Begadi SCAR-L and SCAR-SC: The original HopUp unit is only partially compatible with standard HopUp Buckings. (Lip too long and slows down the BBs) A clean feeding was only possible with our Begadi FYL5 Short Bucking. Alternatively, an FNS HopUp unit should be considered.
E&C guns with Neptun HopUp Unit: Please note the correct setting of the Neptun. With the original Nozzle 4 shims must be used, the loading channel must be turned out 1.5 mm.
ICS guns with Neptun HopUp Unit: Please note the correct setting of the Neptun. With the original Nozzle 4 shims must be used, the loading channel must be turned out 2 mm.
S&T T21: The magazine sits in the gun without adjustment and without play, but slightly touches the Body. If you want to optimize this, 1 mm of material can be removed from the rear surfaces.
Feeding:
A good magazine is important to avoid feeding problems. However, a magazine is only part of the solution; the HopUp unit, Bucking, Nozzle, timing and a reasonable bullet weight should also be taken into account, to prevent feeding problems. If you notice that your Begadi PRO magazine suddenly no longer feeds well, carry out maintenance as described above. Use very little silicone oil in the magazine and on the Spring! A light wetting (thin film) of the parts is sufficient. The magazine must not be soaked. Otherwise your HopUp will lose performance after maintenance and must be shot "dry"
Accessories:
- Begadi PRO Super Feed Magazine Spring
- Spare part set for Begadi PRO AR15 / M4 Magazine
- Transparent window for Begadi PRO AR15 / M4 Magazine
- BB Limiter for Begadi PRO Midcap Magazines
Video of the Begadi PRO AR15 MidCap Magazine:
00:00 Scope of delivery, 01:42 Covering the windows, 04:10 Disassembly
05:38 Maintenance/cleaning, 11:12 Applying stickers to the smoke version
Video for labeling/individualization
Exterior views (complete) of the Begadi PRO AR15 / M4 Midcap magazine:
Exterior views (details) of the Begadi PRO AR15 / M4 Midcap magazine:
Interior views of the Begadi PRO AR15 / M4 Midcap magazine:
Application examples with individualization by means of transparent magazine window:
Application examples on weapon / visual appearance:
Review Partner