Begadi PRO 50° AEP Balanced HopUp Rubber / Bucking for Cyma AEP Series -green-
-
CYMA CM.125 AEP Gearbox with motor (free from 14 y.)Special Price €27.90 Regular Price €32.90
With our own developed HopUp rubber for the Cyma AEP series, the range is increased and precision improved. Compared to the original, our HopUp rubber offers a significantly larger patch which supports a constant HopUp effect.
The Balance version has been reworked at the rear seal to the nozzle, as well as at the front to the barrel, to improve compatibility with the different Cyma AEP HopUp units.
Inside, another seal has been added, which presses against the nozzle during firing to achieve much more consistent results.
To center the BB in the barrel in the best possible way and thus increase precision, the patch was equipped with a 2.8mm radius. This is slightly smaller than the BB itself and provides an optimal contact surface.
To prevent the rubber from twisting and to keep the patch as straight as possible, two supports were added to the inner area. These rest on the barrel and keep the patch straight.
The hardness is 50 ° and is optimally suited to 0.28g BBs.
Please note:
Our HopUp rubber has been developed together with our CNC Lever System (Art.: 26520215).
These components are exactly matched (not suitable for the CM.125 series).
We recommend a combination of HopUp Rubber and the CNC Lever with adjustment wheel.
Tolerances (Regular / Balanced Bucking):
The Begadi AEP Bucking is characterized by an improved sealing.
This is generated, among other things, by optimizing the lip.
Unfortunately, we found that the HopUp units from Cyma have very high tolerances, even in the same series.
Thus, there is a possibility that tolerance deviations occur in a few specimens within a model series, although the largest proportion again does not cause any problems.
As a result, it can happen in rare cases that the Regular Bucking is squeezed too much during assembly (0.5mm), making it difficult to feed the BB into the barrel.
In this case, the balance version of our bucking is more suitable, because the lip has been adapted and manufactured softer.
Accessories:
- Begadi PRO CNC HopUp Lever incl. adjustment wheel for Cyma AEPs
- Begadi PRO 50° AEP Regular HopUp Rubber / Bucking
The Balance version has been reworked at the rear seal to the nozzle, as well as at the front to the barrel, to improve compatibility with the different Cyma AEP HopUp units.
Inside, another seal has been added, which presses against the nozzle during firing to achieve much more consistent results.
To center the BB in the barrel in the best possible way and thus increase precision, the patch was equipped with a 2.8mm radius. This is slightly smaller than the BB itself and provides an optimal contact surface.
To prevent the rubber from twisting and to keep the patch as straight as possible, two supports were added to the inner area. These rest on the barrel and keep the patch straight.
The hardness is 50 ° and is optimally suited to 0.28g BBs.
Please note:
Our HopUp rubber has been developed together with our CNC Lever System (Art.: 26520215).
These components are exactly matched (not suitable for the CM.125 series).
We recommend a combination of HopUp Rubber and the CNC Lever with adjustment wheel.
Tolerances (Regular / Balanced Bucking):
The Begadi AEP Bucking is characterized by an improved sealing.
This is generated, among other things, by optimizing the lip.
Unfortunately, we found that the HopUp units from Cyma have very high tolerances, even in the same series.
Thus, there is a possibility that tolerance deviations occur in a few specimens within a model series, although the largest proportion again does not cause any problems.
As a result, it can happen in rare cases that the Regular Bucking is squeezed too much during assembly (0.5mm), making it difficult to feed the BB into the barrel.
In this case, the balance version of our bucking is more suitable, because the lip has been adapted and manufactured softer.
Accessories:
- Begadi PRO CNC HopUp Lever incl. adjustment wheel for Cyma AEPs
- Begadi PRO 50° AEP Regular HopUp Rubber / Bucking
Review Partner