Begadi Spitfire MK-1 Gen.2 Tracer with muzzle flash simulation (14mm CCW, 11mm CW) for green Tracer BBs
Our Spitfire MK-1 is a compact UV tracer unit with muzzle flash simulation.
It can be mounted on all 11mm CW and 14mm CCW (with enclosed adapter) threads. As soon as the BB reaches the front light barrier, it is illuminated by the ultra-bright UV LEDs. All green tracer BBs can be used.
Another feature is the built-in muzzle flash simulation. For this purpose, three orange SMD LEDs are installed at the output of the tracer which flash briefly after a shot and thus simulate the muzzle flash. Both functions (tracer/muzzle flash) can be switched on/off independently of each other.
To charge the tracer, the rear cap with the thread must be unscrewed, now the USB-C socket is open for the charging process. A USB-C cable is included in the delivery.
If the tracer is not in use, it automatically switches to standby after 5 minutes.
Generation.2:
- The Spitfire MK-1 is now no longer supplied via an adapter from 11mm CW to 14mm CCW, instead there are two separate caps in the scope of delivery.
- The aluminum front bezel has been removed and replaced by transparent polycarbonate (bulletproof for 6mm BB). This makes the front LEDs stand out better.
- The internal electronics including the Li-Ion battery of the unit are now of the latest generation.
Features:
- Made from aluminum
- Very compact tracer
- Muzzle flash simulation
- Length: 56mm
- Diameter: 27mm
- Weight: 29g
- Integrated motion sensor
- automatic switch-off/standby
- High Power UV LED technology
- 2 LEDs illuminate the BB from two sides
- A fully charged battery lasts for approx. 15000 shots without Spitfire function, approx. 6000 shots incl. Spitfire function
- Up to 35 BBs per second (2100 RPM) can be illuminated
- Built-in lithium battery with USB-C charging socket
- Integrated charge level indicator (via LED)
- Protection against deep discharge
- The tracer can also be inserted into the sleeves of other silencers
- End cap with 11mm CW and 14mm CCW thread is included
- suitable for green tracer BBs, brightness may vary with other colors
- In case of prolonged storage, it is recommended to charge the battery every 3 months
Operation:
- switch on the tracer via the rear button. The green LED will now light up slightly every 4 seconds
- press and hold the button for 2 seconds = tracer is deactivated/activated
- press and hold the button again for 2 seconds = the muzzle flash is deactivated/activated
- press the button once briefly = the unit switches off
LED on the button (battery indicator):
- green flashing = battery fully charged and unit switched on
- flashing red = The battery is low
- red light = The battery is empty
Use in the Silencer:
The inner tracer unit can also be used in our Supersonic Silencer series.
To do this, the electronics must be unscrewed from the aluminum housing to the rear and installed in the corresponding sleeve.
If you would also like to use the muzzle flash simulation in the Silencer, we recommend the SF Front Cap made of aluminum.
- Begadi tracer sleeves for Supersonic Silencer series
- Begadi Supersonic Silencer SF Front Cap
- Begadi Supersonic Silencer Series
Effect video:
- Demonstration of the optical effect of the Begadi Spitfire MK-1 tracer (YouTube, Begadi)
(Please note, the video still shows the Gen.1 of the article. In the Gen.2, the aluminum front bezel has been removed and replaced by transparent polycarbonate (bulletproof for 6mm BB). This makes the front LEDs stand out better. However, the actual effect of the tracer is still the same, so the video is still linked)
It can be mounted on all 11mm CW and 14mm CCW (with enclosed adapter) threads. As soon as the BB reaches the front light barrier, it is illuminated by the ultra-bright UV LEDs. All green tracer BBs can be used.
Another feature is the built-in muzzle flash simulation. For this purpose, three orange SMD LEDs are installed at the output of the tracer which flash briefly after a shot and thus simulate the muzzle flash. Both functions (tracer/muzzle flash) can be switched on/off independently of each other.
To charge the tracer, the rear cap with the thread must be unscrewed, now the USB-C socket is open for the charging process. A USB-C cable is included in the delivery.
If the tracer is not in use, it automatically switches to standby after 5 minutes.
Generation.2:
- The Spitfire MK-1 is now no longer supplied via an adapter from 11mm CW to 14mm CCW, instead there are two separate caps in the scope of delivery.
- The aluminum front bezel has been removed and replaced by transparent polycarbonate (bulletproof for 6mm BB). This makes the front LEDs stand out better.
- The internal electronics including the Li-Ion battery of the unit are now of the latest generation.
Features:
- Made from aluminum
- Very compact tracer
- Muzzle flash simulation
- Length: 56mm
- Diameter: 27mm
- Weight: 29g
- Integrated motion sensor
- automatic switch-off/standby
- High Power UV LED technology
- 2 LEDs illuminate the BB from two sides
- A fully charged battery lasts for approx. 15000 shots without Spitfire function, approx. 6000 shots incl. Spitfire function
- Up to 35 BBs per second (2100 RPM) can be illuminated
- Built-in lithium battery with USB-C charging socket
- Integrated charge level indicator (via LED)
- Protection against deep discharge
- The tracer can also be inserted into the sleeves of other silencers
- End cap with 11mm CW and 14mm CCW thread is included
- suitable for green tracer BBs, brightness may vary with other colors
- In case of prolonged storage, it is recommended to charge the battery every 3 months
Operation:
- switch on the tracer via the rear button. The green LED will now light up slightly every 4 seconds
- press and hold the button for 2 seconds = tracer is deactivated/activated
- press and hold the button again for 2 seconds = the muzzle flash is deactivated/activated
- press the button once briefly = the unit switches off
LED on the button (battery indicator):
- green flashing = battery fully charged and unit switched on
- flashing red = The battery is low
- red light = The battery is empty
Use in the Silencer:
The inner tracer unit can also be used in our Supersonic Silencer series.
To do this, the electronics must be unscrewed from the aluminum housing to the rear and installed in the corresponding sleeve.
If you would also like to use the muzzle flash simulation in the Silencer, we recommend the SF Front Cap made of aluminum.
- Begadi tracer sleeves for Supersonic Silencer series
- Begadi Supersonic Silencer SF Front Cap
- Begadi Supersonic Silencer Series
Effect video:
- Demonstration of the optical effect of the Begadi Spitfire MK-1 tracer (YouTube, Begadi)
(Please note, the video still shows the Gen.1 of the article. In the Gen.2, the aluminum front bezel has been removed and replaced by transparent polycarbonate (bulletproof for 6mm BB). This makes the front LEDs stand out better. However, the actual effect of the tracer is still the same, so the video is still linked)
Review Partner