Begadi V-Alarm / Lipo Checker / Warner "Compact"
The Begadi LiPo Warner monitors the voltage of each cell in the battery pack and sounds an alarm when it drops below 3.0V. The warner is simply plugged onto the balancer connector of the battery.
Be sure to connect the negative terminal on the LiPo warner (marked with a "-" on the board) to the negative terminal of the balancer connector on your battery (usually the black wire). Precise ICs and only SMD components are used. Due to its small size and light weight, this LiPo Warner can be used anywhere. It fits all 2S - 3S LiPo or LiIon batteries.
Please note:
- When the voltage rises above 4.3V, the LED will flash red and beep slowly
- When the voltage is between 3.0V and 4.3V, the LED will be green and no sound will be heard
- When the voltage is below 3.0V, the LED flashes red and beeps quickly
Please refer to package insert.
39mm x 20mm x 10mm
Be sure to connect the negative terminal on the LiPo warner (marked with a "-" on the board) to the negative terminal of the balancer connector on your battery (usually the black wire). Precise ICs and only SMD components are used. Due to its small size and light weight, this LiPo Warner can be used anywhere. It fits all 2S - 3S LiPo or LiIon batteries.
Please note:
- When the voltage rises above 4.3V, the LED will flash red and beep slowly
- When the voltage is between 3.0V and 4.3V, the LED will be green and no sound will be heard
- When the voltage is below 3.0V, the LED flashes red and beeps quickly
Please refer to package insert.
39mm x 20mm x 10mm
Review Partner