BEGADI Barrel Cleaning Kit "Advanced" with Hard Case (21 pieces)
With this comprehensive barrel cleaning kit, we offer players a high-quality and versatile alternative to conventional cleaning rods.
The set is supplied in a polyester case and includes, in addition to the handle piece and a total of six extension pieces, ten cleaning brush attachments, which are covered with a soft fabric. Two eyelet attachments for cleaning with a cloth (as known from the simple cleaning rods) are also included
The possibility of dismantling reduces the pack size to a minimum, so that it can be carried on the person even during the game
The grip piece in anchor form is made of plastic and is very grippy due to the shape,
so that slipping is prevented
The extension pieces are made of brass and can be screwed together as desired. The length of each extension piece is around 105mm, so that the cleaning rod is up to approx. 630mm long when fully extended
The brush attachments measure 66mm in length, so this set covers all common inner barrel lengths in airsoft
Unlike the "Barrel Cleaning Kit Basic", the individual elements have not been provided with a plastic coating on the part of the manufacturer (the manufacturer primarily manufactures for sharp weapons, where this is not as relevant as for the barrels in the airsoft sector, which are partly made of brass). We therefore recommend to apply a cover with shrink tubing (e.g. article 13017001 or comparable, adjust length if necessary) over the rod elements for brass barrels and barrels with a small inner diameter. This is not necessary for stainless steel barrels and comparable hard barrels. On the lowest store pictures we show how this looks and it also works without problems in handling.
The also included cleaning cord (cleaning wick) is also used in the field of sharp weapons, the enclosed model is also suitable for airsoft barrels and is intended for the final cleaning (can of course also be used for rough pre-cleaning, if the inner barrel has significant contamination)
In the middle of the cleaning cord, the manufacturer has incorporated an area with small wire bristles on the inside - we have tested this: the inner barrel is not damaged, due to the smaller diameter at this point
Technical data / dimensions
Polyester - Case
(L x W x H): 19,5 x 15,5 x 4cm
Handle, plastic
Length: 50mm
Extension pieces, brass
Length: 105mm (115mm with thread)
Diameter: 5mm
Brush attachments with fabric
Length: 66mm (75mm with thread)
Eyelet attachments, plastic
Length: 40mm (47mm with thread)
Cleaning cord
Length cleaning section (green-brown): 75cm
Total length: 187cm
Compatibility with the BEGADI barrel cleaning kit "Basic" (8 pieces):
From the scope of delivery of the Basic set, only the eyelet attachments can be used.
The extension rods are not compatible with each other due to different thread diameters
Unlike the "Barrel Cleaning Kit Basic", the individual elements have not been provided with a plastic coating on the part of the manufacturer (the manufacturer primarily manufactures for sharp weapons, where this is not as relevant as for the barrels in the airsoft sector, which are partly made of brass). We therefore recommend to apply a cover with shrink tubing (e.g. article 13017001 or comparable, adjust length if necessary) over the rod elements for brass barrels and barrels with a small inner diameter. This is not necessary for stainless steel barrels and comparable hard barrels. On the following pictures we show how this looks like - it also works without any problems in handling.
The set is supplied in a polyester case and includes, in addition to the handle piece and a total of six extension pieces, ten cleaning brush attachments, which are covered with a soft fabric. Two eyelet attachments for cleaning with a cloth (as known from the simple cleaning rods) are also included
The possibility of dismantling reduces the pack size to a minimum, so that it can be carried on the person even during the game
The grip piece in anchor form is made of plastic and is very grippy due to the shape,
so that slipping is prevented
The extension pieces are made of brass and can be screwed together as desired. The length of each extension piece is around 105mm, so that the cleaning rod is up to approx. 630mm long when fully extended
The brush attachments measure 66mm in length, so this set covers all common inner barrel lengths in airsoft
Unlike the "Barrel Cleaning Kit Basic", the individual elements have not been provided with a plastic coating on the part of the manufacturer (the manufacturer primarily manufactures for sharp weapons, where this is not as relevant as for the barrels in the airsoft sector, which are partly made of brass). We therefore recommend to apply a cover with shrink tubing (e.g. article 13017001 or comparable, adjust length if necessary) over the rod elements for brass barrels and barrels with a small inner diameter. This is not necessary for stainless steel barrels and comparable hard barrels. On the lowest store pictures we show how this looks and it also works without problems in handling.
The also included cleaning cord (cleaning wick) is also used in the field of sharp weapons, the enclosed model is also suitable for airsoft barrels and is intended for the final cleaning (can of course also be used for rough pre-cleaning, if the inner barrel has significant contamination)
In the middle of the cleaning cord, the manufacturer has incorporated an area with small wire bristles on the inside - we have tested this: the inner barrel is not damaged, due to the smaller diameter at this point
Technical data / dimensions
Polyester - Case
(L x W x H): 19,5 x 15,5 x 4cm
Handle, plastic
Length: 50mm
Extension pieces, brass
Length: 105mm (115mm with thread)
Diameter: 5mm
Brush attachments with fabric
Length: 66mm (75mm with thread)
Eyelet attachments, plastic
Length: 40mm (47mm with thread)
Cleaning cord
Length cleaning section (green-brown): 75cm
Total length: 187cm
Compatibility with the BEGADI barrel cleaning kit "Basic" (8 pieces):
From the scope of delivery of the Basic set, only the eyelet attachments can be used.
The extension rods are not compatible with each other due to different thread diameters
Unlike the "Barrel Cleaning Kit Basic", the individual elements have not been provided with a plastic coating on the part of the manufacturer (the manufacturer primarily manufactures for sharp weapons, where this is not as relevant as for the barrels in the airsoft sector, which are partly made of brass). We therefore recommend to apply a cover with shrink tubing (e.g. article 13017001 or comparable, adjust length if necessary) over the rod elements for brass barrels and barrels with a small inner diameter. This is not necessary for stainless steel barrels and comparable hard barrels. On the following pictures we show how this looks like - it also works without any problems in handling.
Review Partner