Begadi One Piece CNC RMR Mount for Army Armament R32 Earl & Excalibur
CNC machined mount, suitable for the R32 GBB models "Earl" and Excalibur" from Army Armament.
With this Mount Mini Reddots can be used on the GBB.
Please note the hole spacing: 19mm (M3) - 14mm (M4)
Mounting:
Remove the slide from the weapon, unscrew the rear sight and remove the nozzle housing from the slide (the housing is additionally secured at the rear by a pin which must be pressed in).
Now reinsert the housing, place the RMR Mount on the slide and first tighten with the two small screws (included with the old RMR, which is supplied with each GBB), then mount the rear sight screw. It is best to use a light threadlocker on all screws.
Compared to the original Mount, this Mount is a more convenient solution and easier to install.
When mounting the dot, first tighten both screws lightly (check length) and only tighten when both screws are properly seated
With this Mount Mini Reddots can be used on the GBB.
Please note the hole spacing: 19mm (M3) - 14mm (M4)
Mounting:
Remove the slide from the weapon, unscrew the rear sight and remove the nozzle housing from the slide (the housing is additionally secured at the rear by a pin which must be pressed in).
Now reinsert the housing, place the RMR Mount on the slide and first tighten with the two small screws (included with the old RMR, which is supplied with each GBB), then mount the rear sight screw. It is best to use a light threadlocker on all screws.
Compared to the original Mount, this Mount is a more convenient solution and easier to install.
When mounting the dot, first tighten both screws lightly (check length) and only tighten when both screws are properly seated
Review Partner