Begadi CNC Aluminum Red Dot Mounting Plate for Cyma CM.126 and CM.132 AEPs
Other interesting articles:
This adapter plate for mounting Red Dots was designed specifically for the CM.132, but can also be mounted on the CM.126 with an adjustment
Holstering is also no problem with the mounting plate with many common hard shell holsters.
(e.g. BEGADI "Multi Fit" hard-shell holster).
Features:
- CNC machined from aluminum
- Compatible with all Red Dots with a hole spacing of 13mm (M4) and 19.5mm (M3)
- Screws to mount the plate on the CM.132 or CM.126 are included
- Screws for mounting the Red Dots are not included, they are included with the Red Dot.
Mounting on the CM.132:
Mounting is possible without any adjustments.
For this, the rear sight must be removed, this is fixed on the inside of the slide with a screw.
The mounting plate is placed in place of the rear sight in the recess provided for this purpose, and fixed from below with the enclosed screw.
For better hold, it is also possible to use the mounting holes of the CM.126.
However, holes must be drilled in the slide for this (hole spacing 15mm - M3).
Adjustments and mounting for the CM.126:
For the CM.126, the rear sight is fixed to the slide, so mounting this way is not possible.
For the CM.126, the block on the underside, which engages in the lock-out of the rear sight, must be removed.
In addition, two holes must be drilled in the slide. CAUTION: Mounting must be in front of the rear sight.
The exact distances can be seen in the product photos.
The two screws for mounting are included.
The following Red Dots from our assortment fit for example:
- Mini Reddot with light sensor
- Begadi Micro Dot Gen.2 (19mm) with 2 mounts & protective cover
- Begadi Compact Dot
The following Red Dots from our assortment do not fit for example:
- UFC Reflex Mini Reddot - black
- xFORCE XFR02 / XR020 Solar Micro Red Dot
Holstering is also no problem with the mounting plate with many common hard shell holsters.
(e.g. BEGADI "Multi Fit" hard-shell holster).
Features:
- CNC machined from aluminum
- Compatible with all Red Dots with a hole spacing of 13mm (M4) and 19.5mm (M3)
- Screws to mount the plate on the CM.132 or CM.126 are included
- Screws for mounting the Red Dots are not included, they are included with the Red Dot.
Mounting on the CM.132:
Mounting is possible without any adjustments.
For this, the rear sight must be removed, this is fixed on the inside of the slide with a screw.
The mounting plate is placed in place of the rear sight in the recess provided for this purpose, and fixed from below with the enclosed screw.
For better hold, it is also possible to use the mounting holes of the CM.126.
However, holes must be drilled in the slide for this (hole spacing 15mm - M3).
Adjustments and mounting for the CM.126:
For the CM.126, the rear sight is fixed to the slide, so mounting this way is not possible.
For the CM.126, the block on the underside, which engages in the lock-out of the rear sight, must be removed.
In addition, two holes must be drilled in the slide. CAUTION: Mounting must be in front of the rear sight.
The exact distances can be seen in the product photos.
The two screws for mounting are included.
The following Red Dots from our assortment fit for example:
- Mini Reddot with light sensor
- Begadi Micro Dot Gen.2 (19mm) with 2 mounts & protective cover
- Begadi Compact Dot
The following Red Dots from our assortment do not fit for example:
- UFC Reflex Mini Reddot - black
- xFORCE XFR02 / XR020 Solar Micro Red Dot
Review Partner