Begadi CNC 90° Upgrade Piston Kit incl. Springguide for L96 / Well MB01, MB04, MB05, MB06 spring pressure models
CNC Upgrade Kit for L96 spring pressure guns.
(A 90° sear, trigger unit is required)
Consists of:
- CNC Aluminum Piston with Teflon sear and 90° Stainless Steel Piston Base
- CNC stainless steel Springguide with ball bearing
- 70° Sorbo Pad with ventilation
- O-Ring for L96 Cylinder (15,3 x 2,4mm)
Piston:
- CNC machined aluminum body
- Teflon (PTFE) slide ring to reduce friction
- Piston base (90°) made of stainless steel for maximum durability
- Green anodized
- Dimensions: outer diameter: 19.8mm; length: 117mm; inner diameter: 13.5mm.
- 70° Sorbo pad with ventilation
Springguide:
- Made of stainless steel
- Suitable for springs with an inner diameter of min: 7mm and max. 13mm outer diameter
- Ball bearing for free rotation of the spring
Mounting:
Please note the following points when assembling:
- Secure the Piston Base (stainless steel) with some threadlocker.
- Make sure that the ventilation holes of the Sorbo Pad are aligned with the Piston.
- Secure the Sorbo Pad with some super glue and the screw provided.
- Use some threadlocker on the threads of the Springguide as well.
- Wet the o-ring as well as the cylinder inside with some silicone grease.
Suitable for:
Maruzen APS2, EX, Type 96, Well MB01, MB04, MB05, MB06, MB08, MB13, MB14, Snow Wolf M24 SW-04, M99, SAG E&C L96, Specna Arms L96
(A 90° sear, trigger unit is required)
Consists of:
- CNC Aluminum Piston with Teflon sear and 90° Stainless Steel Piston Base
- CNC stainless steel Springguide with ball bearing
- 70° Sorbo Pad with ventilation
- O-Ring for L96 Cylinder (15,3 x 2,4mm)
Piston:
- CNC machined aluminum body
- Teflon (PTFE) slide ring to reduce friction
- Piston base (90°) made of stainless steel for maximum durability
- Green anodized
- Dimensions: outer diameter: 19.8mm; length: 117mm; inner diameter: 13.5mm.
- 70° Sorbo pad with ventilation
Springguide:
- Made of stainless steel
- Suitable for springs with an inner diameter of min: 7mm and max. 13mm outer diameter
- Ball bearing for free rotation of the spring
Mounting:
Please note the following points when assembling:
- Secure the Piston Base (stainless steel) with some threadlocker.
- Make sure that the ventilation holes of the Sorbo Pad are aligned with the Piston.
- Secure the Sorbo Pad with some super glue and the screw provided.
- Use some threadlocker on the threads of the Springguide as well.
- Wet the o-ring as well as the cylinder inside with some silicone grease.
Suitable for:
Maruzen APS2, EX, Type 96, Well MB01, MB04, MB05, MB06, MB08, MB13, MB14, Snow Wolf M24 SW-04, M99, SAG E&C L96, Specna Arms L96
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details1.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details2.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details3.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details4.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details5.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details6.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details7.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details8.jpg)
![](/catalog/images/b-00820851-begadi-cnc-piston-kit-l96-mb01-details9.jpg)