Army Armament Red Dot Mount Plate (flach) für R601 HiCapa / TTI Combat Master GBB Serie
With this aluminum mount, Red Dots can be mounted on the slide of the Army Armament TTI Combat Master and R601 GBB.
For mounting, the rear sight must be removed and replaced by the mount.
Different Reddots can be used, 2 threads are available for this:
M3 thread with a bore distance (center to center) of: 19mm
M4 thread with a hole spacing (center to center) of: 14mm
Screws:
When mounting your Red Dot, make sure that the screws are of the correct length!
The screws must not protrude from the bottom of the mount when mounted.
Check this in advance before installing the mount on the slide.
Mounting:
1: Remove the slide from the handle
2: Loosen the screw and the guide piece of the hammer at the rear of the slide
3: Loosen the rear sight via the attached screw (top)
4: Remove the Nozzle Housing inside the slide together with the Nozzle
5: Push the rear sight to the side to be able to remove it
6: Insert the Mount Plate into the holder provided and secure it with the screw provided
7: Nozzle Housing together with the Nozzle can now be reinserted and secured (HopUp Unit must be pushed forward slightly)
For mounting, the rear sight must be removed and replaced by the mount.
Different Reddots can be used, 2 threads are available for this:
M3 thread with a bore distance (center to center) of: 19mm
M4 thread with a hole spacing (center to center) of: 14mm
Screws:
When mounting your Red Dot, make sure that the screws are of the correct length!
The screws must not protrude from the bottom of the mount when mounted.
Check this in advance before installing the mount on the slide.
Mounting:
1: Remove the slide from the handle
2: Loosen the screw and the guide piece of the hammer at the rear of the slide
3: Loosen the rear sight via the attached screw (top)
4: Remove the Nozzle Housing inside the slide together with the Nozzle
5: Push the rear sight to the side to be able to remove it
6: Insert the Mount Plate into the holder provided and secure it with the screw provided
7: Nozzle Housing together with the Nozzle can now be reinserted and secured (HopUp Unit must be pushed forward slightly)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details1.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details2.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details3.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details4.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details5.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details6.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details7.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details8.jpg)
![](/catalog/images/b-22121231-army-armament-r601-tti-rmr-mount-plate-details9.jpg)