E&C M4 "LVC" S-AEG - Version 2 with Mamba Motor, FSWS 2.0, Speed Trigger & Begadi CORE EFCS / Mosfet (free from 18 yrs.)
Shipping possible from the age of 18 due to age check.
Possession permitted from the age of 18. This Airsoft is subject to the prohibition of carrying!
You can see details of the shipping service providers when you are logged in.
For your orders with Begadi, we use a system based on two-step authentication, as required by law. The age of the account holder and the age of the recipient of the goods are checked.
The check is automated, convenient and GDPR-compliant! No data is stored.
Importer: Begadi
System: S-AEG (= shoots only semiauto, no full auto)
Caliber: 6mm
HopUp: yes, adjustable
Material: mainly metal + plastic
Magazine capacity: 2x 140 rounds (MidCap)
Energy:ca. 1,7 - 1,8 Joule @ 0,20g
Total length: approx. 840 - 910mm
Barrel length: 363mm
Plug-in system: Dean
Mosfet: Yes, Begadi CORE EFC system
Gearbox: Version V2 with FSWS
Weight: approx. 2900g
Thread type Barrel Nut: EU (M32x1,5mm)
Scope of delivery: Weapon, 2 magazines, manual
PTB approval: Details see here
Features:
- Solid, modern and good value for money
- Completely made of metal, only grip and stock are made of Nylon Fiber
- CNC machined handguard with M4 threads for mounting rails
- Modern aluminum receiver
- fully adjustable FlipUp Sights
- 2x MidCap magazine with 140 rounds included
- The gun is delivered with DEAN plugs
- Sling receiver on both sides between body and stock, made of steel
- Functional boltcatch for easy accessibility of the Hop Up Unit
- HopUp unit in rotary design
- 14mm negative (CCW) thread
- very fast response
- internal EFCS/Mosfet (Begadi CORE)
- Spring quick change system directly accessible via stock tube
- 6,03mm tuning barrel
- adjustable trigger (Speed-Trigger)
- Nozzle with 21,00mm
- adjusted AOE via large Sorbo Pad on Cylinderhead
- Begadi Mamba 30K balanced motor with neodymium magnets
Speed Trigger:
This gun has an adjustable trigger. To adjust this there is a small screw behind the trigger (1mm allen). The screw must not be screwed in too far, otherwise the Safety Lever can jam inside.
We recommend setting the gun to Safe and then turning the screw in until the trigger has only a very small amount of play.
Internals:
- V2 Gearbox with 8mm steel ball bearings and FSWS
- FSWS directly accessible via stock tube, gearbox does not need to be removed
- 21,00mm Nozzle made of brass with two O-rings
- Valved CNC aluminum piston head with ball bearings
- Piston with steel teeth
- CNC brass cylinder head with two o-rings
- Stainless steel cylinder
- None linear Spring (M120)
- Stainless steel Springguide with ball bearing
- Steel Gears with 18:1
Motor information:
- HighTorque / Balanced Motor
- Speed: 30.000 rpm
- TPA: 19
- Torque: 5,10 Kg/cm
- Current (peak): 85A
- Magnets: Neodymium
Handguard/Rails:
Handguard provides M3 threads for mounting additional rails, hole spacing is 20mm each (center/center).
- Otto Repa OMR Picatinny Rail, CNC machined, medium - 137mm -..
- Otto Repa OMR Picatinny Rail, CNC Milled, Extra Long - 237mm -
Storage Information:
Always disconnect the battery from the weapon when not in use! Otherwise their battery can be discharged by the continuous monitoring and thus be damaged
- Internal EFC/Mosfet system
- Trigger via microswitch
- Mechanical safety
- Cycle monitoring (no GearJam possible)
- Battery monitoring (LiPo, LiFe, Li-Ion, NiMH)
- Battery shutdown (LiPo, LiFe, Li-Ion, NiMH)
- Fast response
- Intelligent active brake
- Also for strong batteries
- Short time loadable up to 240A
- Overvoltage protection
- Short circuit protection
- Plug & Play
- Dean / T-plug
- Semi-only, especially for Germany
- 4 years warranty
- Made in EU
Detailed information about the individual features can be found on our Begadi CORE EFCS / Mosfet Infopage .
Additionally we recommend our Begadi CORE EFCS / Mosfet Teaser, which also presents all features in detail. You can find it here. (YouTube, Begadi)
Additional information about warranty + CORE:
The above mentioned 4 years warranty refers to the complete S-AEG, not only to the function of the Begadi CORE, if the CORE Mosfet is installed. However, the same is the prerequisite for this extended warranty. If, for example, a different Mosfet is selected in the special Mosfet options (i.e. you ask us to remove the CORE and install a different Mosfet), the warranty will be reduced from 4 years to the usual 2 years. Also, the removed CORE will not be included in this case, but retained. Normally we always deliver removed components, but this is explicitly not the case with the CORE - the CORE is only delivered in assembled condition
Videos & Reviews:
-[Tech Video] Begadi CORE EFCS/Mosfet - Info and Features (YouTube, REAPERs Airsoft)
- E&C MK18 + LVC + MCR S-AEG with Begadi CORE EFCS / Mosfet series review (YouTube, REAPERs Airsoft)
Matching batteries (examples, other batteries with the same dimensions will also fit):
- Begadi "AMAX Superio" LiPo battery 11.1V 1500mAh 30/60C+ "Regular Triple Stick" -gold color-
- Begadi "AMAX Superio" LiPo battery 11,1V 1500mAh 30/60C+ "Compact Triple Stick" -gold color-
- Begadi "AMAX Superio" LiPo Battery 11.1V 1500mAh 30/60C+ Single Stick" -gold color-
- Begadi "AMAX Superio" LiPo Battery 11,1V 1200mAh 30/60C+ "Single Stick" -gold color-
- Begadi "AMAX Superio" LiPo Battery 7.4V 1200mAh 30/60C+ "Single Stick" -gold color-
- Begadi "AMAX" LiPo Battery 11,1V 1300mAh 30C Triple Stick with Dean -blue-
- Begadi "AMAX" LiPo Battery 11,1V 2150mAh 25C Triple Stick with Dean -silver-
- Begadi "AMAX" LiPo battery 11,1V 1450mAh 30C Single Stick with Dean -olive-
- Begadi Li-Ion battery 7,4V 1600mAh 20C "Single Stick" with Dean connector
- Begadi "AMAX" LiPo Battery 7,4V 1100mAh 20C Single Stick with Dean
Required connector type: Dean
Info about suitable M4 magazines:
We have checked some magazine types for compatibility for you to give an indication with which magazines the model harmonizes well and with which not so well.
- Lonex M4 / M16 MidCap Magazine, Gen.2 (200 BBs): Fit: slight play / Feeding: very good
- ICS TMAGs Fit : good / Feeding: good
- Begadi M4/M16 Midcap magazine (140 BBs) fit: good / feeding: good
- E&C M4 / M16 LowCap magazine (70 BBs) Fit: slight wobble / Feeding: good
- E&C M4 / M16 MidCap magazine (140 BBs) fit: slight wobble / feeding: good
- Arcturus M4 Steel Midcap Magazine (30 / 135 BBs): Fit: slight wobble / Feeding: very good
- Arcturus M4 plastic midcap magazine with sight window (30 / 130 BBs): Fit: light play / Feeding: very good
- Golden Eagle M4 steel LowCap magazine (68 BBs): Feeds well. Has a lot of play in the magazine well.