E&C M4 "Honey Badger" PDW S-AEG - Version 2 with Mamba Motor, Speed Trigger, Silencer & Begadi CORE EFCS / Mosfet (free from 18 yrs.)
Shipping possible from the age of 18 due to age check.
Possession permitted from the age of 18. This Airsoft is subject to the prohibition of carrying!
You can see details of the shipping service providers when you are logged in.
For your orders with Begadi, we use a system based on two-step authentication, as required by law. The age of the account holder and the age of the recipient of the goods are checked.
The check is automated, convenient and GDPR-compliant! No data is stored.
Importer: Begadi
System: S-AEG (= shoots only semiauto, no full auto)
Caliber: 6mm
HopUp: yes, adjustable
Material: mainly metal + plastic
Magazine capacity: 2x 140 rounds (MidCap)
Energy:ca. 1,3 - 1,4 Joule @ 0,20g
Total length: approx. 630 - 690mm
Barrel length: 200mm / 6,03mm tuning barrel
Plug-in system: Dean
Mosfet: Yes, Begadi CORE EFC system
Gearbox: Version V2 with FSWS
Weight: approx. 2400g
Thread type Barrel Nut: EU (M32x1,5mm)
Scope of delivery: Weapon, 2 magazines, speedloader, 3 rails and manual
PTB approval: Details see here
Features:
- Solid, modern and good value for money
- Very compact and handy
- Completely made of metal, only grip is made of Nylon Fiber
- CNC machined MK8 handguard with M-LOK system
- fully adjustable FlipUp Sights
- 2x MidCap magazine with 140 rounds included
- The gun is delivered with DEAN plugs
- Compact steel and aluminum PDW stock
- Mounting for QD Sling Swivel on handguard and stock
- Integrated silencer dummy
- Functional boltcatch for easy access to the HopUp unit
- HopUp Unit in rotary design
- 14mm negative (CCW) thread
- very fast response
- internal EFCS/Mosfet (Begadi CORE)
- Spring quick change system (gearbox must be removed)
- adjustable trigger (speed trigger)
- V2 Gearbox with 8mm bearing
- Nozzle with 21,20mm
- adjusted AOE via big Sorbo Pad on Cylinderhead
- Begadi Mamba 30K Balanced Motor with Neodymium Magnets
Speed Trigger:
This gun has an adjustable trigger. To adjust this there is a small screw behind the trigger (1mm allen). The screw must not be screwed in too far, otherwise the Safety Lever can jam inside.
We recommend setting the gun to Safe and then turning the screw in until the trigger has only a very small amount of play.
Internals:
- V2 Gearbox with 8mm steel ball bearings and FSWS
- 21,00mm Nozzle made of brass with two o-rings
- Valved CNC aluminum piston head with ball bearings
- Piston with steel teeth
- CNC brass cylinder head with two o-rings
- Stainless steel cylinder
- None linear Spring (M120)
- Stainless steel Springguide with ball bearing
- Steel Gears with 18:1 (13 tooth Sector Gear)
Motor Information:
- HighTorque / Balanced Motor
- Speed: 30.000 rpm
- TPA: 19
- Torque: 5,10 Kg/cm
- Current (peak): 85A
- Magnets: Neodymium
Storage Information:
Always disconnect the battery from the gun when it is not in use! Otherwise, your battery may be discharged by the continuous monitoring and thus be damaged
- Internal EFC/Mosfet system
- Trigger via microswitch
- Mechanical safety
- Cycle monitoring (no GearJam possible)
- Battery monitoring (LiPo, LiFe, Li-Ion, NiMH)
- Battery shutdown (LiPo, LiFe, Li-Ion, NiMH)
- Fast response
- Intelligent active brake
- Also for strong batteries
- Short time loadable up to 240A
- Overvoltage protection
- Short circuit protection
- Plug & Play
- Dean / T-plug
- Semi-only, especially for Germany
- 4 years warranty
- Made in EU
Detailed information about the individual features can be found on our Begadi CORE EFCS / Mosfet Infopage .
Additionally we recommend our Begadi CORE EFCS / Mosfet Teaser, which also presents all features in detail. You can find it here. (YouTube, Begadi)
Additional information about warranty + CORE:
The above mentioned 4 years warranty refers to the complete S-AEG, not only to the function of the Begadi CORE, if the CORE Mosfet is installed. However, the same is the prerequisite for this extended warranty. If, for example, a different Mosfet is selected in the special Mosfet options (i.e. you ask us to remove the CORE and install a different Mosfet), the warranty will be reduced from 4 years to the usual 2 years. Also, the removed CORE will not be included in this case, but retained. Normally, we always include removed components, but this is explicitly not the case with the CORE - the CORE is only delivered in assembled condition
Suitable batteries (examples, other batteries with the same dimensions will also fit):
- Begadi "AMAX Superio" LiPo Battery 7.4V 1200mAh 30/60C+ "Single Stick" -gold colored-
- Begadi "AMAX" LiPo battery 7,4V 1100mAh 20C Single Stick with Dean
Required plug type: Dean
Other matching batteries (Only possible with minor adjustments):
- Begadi "AMAX Superio" LiPo Battery 11.1V 1200mAh 30/60C+ "Single Stick" -gold color-
- Begadi "AMAX" LiPo battery 11.1V 1100mAh 20C "Compact Stick
- Begadi "AMAX" LiPo battery 11,1V 1100mAh 20C "Compact" Single Stick -beige-
The rear part of the stick tube can be screwed out further via a thread. So there is a little more space for the cables.
If you would like to use larger batteries, the rear cover inside can also be machined.
More info can be found in the video from REAPERs Airsoft (YouTube)
Info about suitable M4 magazines:
We have checked some magazine types for compatibility for you, to give an indication with which magazines the model harmonizes well and with which less well.
- Lonex M4 / M16 MidCap Magazine, Gen.2 (200 BBs): Fit: slight play / Feeding: very good
- ICS TMAGs Seat : a little wobbly / Feeding: good
- E&C M4 / M16 LowCap magazine (70 BBs) Seat : slight wobble / Feeding: good
- E&C M4 / M16 MidCap magazine (140 BBs) fit: slight wobble / feeding: good
- Arcturus M4 Steel Midcap Magazine (30 / 135 BBs): Fit: slight wobble / Feeding: very good
- Arcturus M4 plastic midcap magazine with sight window (30 / 130 BBs): Fit: light play / Feeding: very good
- Begadi M4/M16 midcap magazine (140 BBs) fit : good / feeding: good
- Golden Eagle M4 steel LowCap magazine (68 BBs): Feeds well. Has a lot of play in the magazine well.
Pricing:
The PDW stock (steel) installed on this gun is markedly more expensive than ordinary crane stocks, etc, so this ends up affecting the overall price of the Honey Badger.
Videos & Reviews:
- [Tech Video] Begadi CORE EFCS/Mosfet - Info and Features (YouTube, REAPERs Airsoft)
- E&C SMR16 Version 3 & MK18 Version 3 Upgrades + Honey Badger Video (YouTube, REAPERs Airsoft)
- E&C M4 "Honey Badger" PDW S-AEG - Version 2 with Mamba Motor, Speed Trigger, Silencer & Begadi CORE EFCS / Mosfet Video Review (YouTube, Combat AS)