Begadi Airsoft spring pressure grenade with integrated fuse & adjustable sensitivity, rugged design & easy to use, holds up to 300 BBs -TAN-
The Airsoft spring pressure grenade was developed by Begadi itself, extensively tested & optimized and manufactured according to our specifications.
The Begadi Spring Grenade is a purely mechanical airsoft grenade. It needs neither gas nor CO2 - and therefore no seals. This makes the grenade very robust and user friendly. Maintenance is also very easy due to the minimalist design. Our grenade can be re-cocked, refilled and armed in a few simple steps - then it is ready for use again. The textured outer surface not only has an attractive design, but also provides a good grip. The fill level can be quickly detected via the viewing windows.
The material used is DuPont Zytel©, a high-quality polyamide plastic that is also used for knife handles and weapon components!
The Airsoft grenade is equipped with an integrated safety slide, whereby after throwing no safety pin or other small parts are left or scattered, which can be lost.
The safety can be easily operated by a slide. If the green field is visible, the grenade is secured. If the red field is visible, the grenade is armed. The sensitivity of the grenade can be finely adjusted. For this purpose, the grenade has an adjustment screw and two different safety slides, which we will discuss in detail in the instruction video below.
Two different safety slides are included in the delivery. The gray safety slide is the minimum safety. This covers only the most necessary range, so that the grenade can not trigger itself. With the gray safety slider you can exhaust the complete range of adjustment possibilities. Here, however, it can happen during transport, racing, ect. that the BB wings loosen slightly and slip to the minimum setting.
Therefore, before unlocking, the BB wings should be turned again against the set stop. The black safety slide is the maximum safety/individual safety. This blocks the BB-wings very strongly in the unprocessed state, which is why this is only suitable for hard soils. In addition, you have the option to edit the black safety slide individually, by editing the black safety slide can be set individually to exactly the sensitivity level that you prefer to use, and thus prevents, in contrast to the gray safety slide, a loosening of the setting.
After triggering, the BB wings remain open. The inside is red, which is why the grenade is easy to find again after throwing. There are no loose parts or segments here, the grenade remains a unit even when triggered, so there is no need to pick up individual components as with other models!
Inside the grenade is a factory installed standard S-AEG spring M120. With a stronger spring, the range can be slightly increased (the maximum is an M130). Keep in mind, however, that a stronger spring also triggers heavier. The simple design makes the grenade very user friendly. The grenade consists of only 20 parts including screws, springs, etc. which makes it very low maintenance. The DuPont Zytel© body is solid and robust! This drastically minimizes the parts that can be damaged, but if something does break, we have all the parts to get the grenade back in shape with little effort.
Above the safety slide is an eyelet, over which the grenade can be attached to the equipment and / or a ring can be attached.
Scope of delivery:
The grenade comes in an individual box, in the box is a (ready mounted) grenade and an accessory / spare parts kit, this spare parts kit contains:
- the tool for assembly, maintenance and adjustment
- two spare screws for the shell
- one spare spring and ball each for the safety slide
- another set screw for the adjustment
- the spare parts for the color shutters
- a second safety slide for minimum release force
Features:
- simple construction, few parts and very easy to maintain
- very robust, even when striking concrete or stone
- integrated safety slide, thus no collecting of loose parts
- shoots/sprays up to approx. 300 BBs in all directions
- Range up to approx. 3-4 meters in any direction )
- sensitivity and drop height is adjustable
- compatible with standard S-AEG springs
- completely reusable: Simply cock and refill BBs
- can be filled with speedloader
- Textured outer surfaces for optimal grip
Data:
- Height when closed: 105 mm
- Height when open: 180 mm
- Diameter: 56 mm
- Capacity: up to approx. 300 BBs
- Weight: Approx. 180g (unloaded)
Accessories and spare parts
- Spare part sets for Begadi spring pressure grenade
Recommendation for bags:
Due to its size and design, the Begadi Spring Pressure Grenade fits into many commercially available pouches. M4 magazine pouches (especially short open type style), grenade pouches, 40mm elastic sided pouches, and similar sized pouches have proven themselves in our testing. If a pocket is too deep, the grenade can be extended with a carabiner!
Reviews
- Review (DE) by HawkEye AirSoft on YouTube
- Review (DE) by TEAM-030-AIRSOFT on YouTube
- Review (DE) by Airsoft by TNT-Germany on YouTube
- Review (DE) by Airsoft Team Raptor on YouTube
- Review (FR) by Golgy, a Sunday Gamer on YouTube
Presentation videos of the grenade:
The grenade on the field
Close-ups and detonation of the grenade, from different angles
Maintenance, configuration, cleaning and handling of the grenade
Navigation:
(one click jumps immediately to the chapter in the YT video, in a new window!)
- Minute 00:07 - Scope of delivery
- Minute 02:20 - Disassembly
- Minute 05:50 - Maintenance
- Minute 09:45 - Assembly
- Minute 12:44 - Adjustment: Minimum
- Minute 15:99 - Setting: Individual
- Minute 17:32 - Filling
Exterior views:
Views in disassembled state & partial components:
Viewing window Views:
Eyelet Views:
View of gray fuse (assembled):
Views / info on greasing and subsequently release sensitivity:
Views / info on setting the release sensitivity:
Comparative view of the 2 fuses:
View of the included accessories:
Scope of delivery:
 Attention! Please note the video for maintenance, configuration, cleaning and handling of the grenade!The grenade must be adjusted after delivery! For this purpose, please watch the below embedded presentation video of the grenade before trying it out. Then either install the gray safety slide for soft surfaces, or adjust the black slide to your wishes (from minute 15:59)! |
The Begadi Spring Grenade is a purely mechanical airsoft grenade. It needs neither gas nor CO2 - and therefore no seals. This makes the grenade very robust and user friendly. Maintenance is also very easy due to the minimalist design. Our grenade can be re-cocked, refilled and armed in a few simple steps - then it is ready for use again. The textured outer surface not only has an attractive design, but also provides a good grip. The fill level can be quickly detected via the viewing windows.
The material used is DuPont Zytel©, a high-quality polyamide plastic that is also used for knife handles and weapon components!
The Airsoft grenade is equipped with an integrated safety slide, whereby after throwing no safety pin or other small parts are left or scattered, which can be lost.
The safety can be easily operated by a slide. If the green field is visible, the grenade is secured. If the red field is visible, the grenade is armed. The sensitivity of the grenade can be finely adjusted. For this purpose, the grenade has an adjustment screw and two different safety slides, which we will discuss in detail in the instruction video below.
Two different safety slides are included in the delivery. The gray safety slide is the minimum safety. This covers only the most necessary range, so that the grenade can not trigger itself. With the gray safety slider you can exhaust the complete range of adjustment possibilities. Here, however, it can happen during transport, racing, ect. that the BB wings loosen slightly and slip to the minimum setting.
Therefore, before unlocking, the BB wings should be turned again against the set stop. The black safety slide is the maximum safety/individual safety. This blocks the BB-wings very strongly in the unprocessed state, which is why this is only suitable for hard soils. In addition, you have the option to edit the black safety slide individually, by editing the black safety slide can be set individually to exactly the sensitivity level that you prefer to use, and thus prevents, in contrast to the gray safety slide, a loosening of the setting.
After triggering, the BB wings remain open. The inside is red, which is why the grenade is easy to find again after throwing. There are no loose parts or segments here, the grenade remains a unit even when triggered, so there is no need to pick up individual components as with other models!
Inside the grenade is a factory installed standard S-AEG spring M120. With a stronger spring, the range can be slightly increased (the maximum is an M130). Keep in mind, however, that a stronger spring also triggers heavier. The simple design makes the grenade very user friendly. The grenade consists of only 20 parts including screws, springs, etc. which makes it very low maintenance. The DuPont Zytel© body is solid and robust! This drastically minimizes the parts that can be damaged, but if something does break, we have all the parts to get the grenade back in shape with little effort.
Above the safety slide is an eyelet, over which the grenade can be attached to the equipment and / or a ring can be attached.
Scope of delivery:
The grenade comes in an individual box, in the box is a (ready mounted) grenade and an accessory / spare parts kit, this spare parts kit contains:
- the tool for assembly, maintenance and adjustment
- two spare screws for the shell
- one spare spring and ball each for the safety slide
- another set screw for the adjustment
- the spare parts for the color shutters
- a second safety slide for minimum release force
Features:
- simple construction, few parts and very easy to maintain
- very robust, even when striking concrete or stone
- integrated safety slide, thus no collecting of loose parts
- shoots/sprays up to approx. 300 BBs in all directions
- Range up to approx. 3-4 meters in any direction )
- sensitivity and drop height is adjustable
- compatible with standard S-AEG springs
- completely reusable: Simply cock and refill BBs
- can be filled with speedloader
- Textured outer surfaces for optimal grip
Data:
- Height when closed: 105 mm
- Height when open: 180 mm
- Diameter: 56 mm
- Capacity: up to approx. 300 BBs
- Weight: Approx. 180g (unloaded)
 Note on legal classificationof the grenade |
|
The grenade is available from us without age proof and restriction. This is due to the fact that the grenade does not have any feature that makes it relevant for the weapons law: - its function is not suitable to influence the attack or defense power of a person (WaffG Annex 1 ff.) - the BBs are not fired in a targeted manner (WaffG Annex 1 / 1.2.3.) - no cold gases are used for propulsion (WaffG Annex 1 / 1.9) - the projectiles are not driven through a barrel (WaffG Annex 1 / 1.1) See also the entire text of the law. Of course, regulatory provisions must be observed, especially with regard to the use in public spaces (nuisance, gross mischief, property damage, etc...)! A responsible handling of the grenade should also be given on the field. |
Accessories and spare parts
- Spare part sets for Begadi spring pressure grenade
Recommendation for bags:
Due to its size and design, the Begadi Spring Pressure Grenade fits into many commercially available pouches. M4 magazine pouches (especially short open type style), grenade pouches, 40mm elastic sided pouches, and similar sized pouches have proven themselves in our testing. If a pocket is too deep, the grenade can be extended with a carabiner!
Reviews
- Review (DE) by HawkEye AirSoft on YouTube
- Review (DE) by TEAM-030-AIRSOFT on YouTube
- Review (DE) by Airsoft by TNT-Germany on YouTube
- Review (DE) by Airsoft Team Raptor on YouTube
- Review (FR) by Golgy, a Sunday Gamer on YouTube
Presentation videos of the grenade:
The grenade on the field
Close-ups and detonation of the grenade, from different angles
Maintenance, configuration, cleaning and handling of the grenade
Navigation:
(one click jumps immediately to the chapter in the YT video, in a new window!)
- Minute 00:07 - Scope of delivery
- Minute 02:20 - Disassembly
- Minute 05:50 - Maintenance
- Minute 09:45 - Assembly
- Minute 12:44 - Adjustment: Minimum
- Minute 15:99 - Setting: Individual
- Minute 17:32 - Filling
Exterior views:
Views in disassembled state & partial components:
Viewing window Views:
Eyelet Views:
View of gray fuse (assembled):
Views / info on greasing and subsequently release sensitivity:
Views / info on setting the release sensitivity:
Comparative view of the 2 fuses:
View of the included accessories:
Scope of delivery:
Review Partner