Begadi LiPo & LiFePo Balance Charger BBC+
Other interesting articles:
Features:
- Charger for LiPo and LiFePo batteries (not suitable for Li-Ion batteries)
- Charging directly via the balancer connector
- No adapters needed
- Charging of 2S and 3S batteries (Lipo: 7,4V and 11,1V or LiFePo 6,6V and 9,9V) possible
- Charging voltage 800 mA
Technical data:
- Dimensions: 100 x 61 x 30mm
- Weight: 100g
- Input: 110 - 240V
- Charging: max. 800 mA
- Display: 2x LED
LED Status:
- Power: Green
- Charging: Red
- Charging completed: Green
- Error: Red flashing
Instructions for use:
1: Connect the charger to the mains. The green LED will start to light up.
2: Select on the bottom of the charger which battery you want to charge (LiPo or LiFe)
3: Now connect the balancer connector of your battery to the charger. (2S - 7,4V or 3S - 11,1V)
4: The red LED is now on and your battery is charging.
5: Wait until the green LED lights up and thus the charging process is completed.
Charging time:
The charger can charge a maximum of 800 mA per hour. Thus, a 1000 mAh battery will be fully charged in about one hour.
Production & Quality:
Chargers with this design are produced by versch. We work with a manufacturer who is a bit more expensive, but delivers a solid quality - also every charger is tested before delivery.
Links & Downloads:
- Tech Video about Airsoft LiPo batteries: (YouTube, REAPERs Airsoft)
This video also discusses the BBC+ charger.
- Charger for LiPo and LiFePo batteries (not suitable for Li-Ion batteries)
- Charging directly via the balancer connector
- No adapters needed
- Charging of 2S and 3S batteries (Lipo: 7,4V and 11,1V or LiFePo 6,6V and 9,9V) possible
- Charging voltage 800 mA
Technical data:
- Dimensions: 100 x 61 x 30mm
- Weight: 100g
- Input: 110 - 240V
- Charging: max. 800 mA
- Display: 2x LED
LED Status:
- Power: Green
- Charging: Red
- Charging completed: Green
- Error: Red flashing
Instructions for use:
1: Connect the charger to the mains. The green LED will start to light up.
2: Select on the bottom of the charger which battery you want to charge (LiPo or LiFe)
3: Now connect the balancer connector of your battery to the charger. (2S - 7,4V or 3S - 11,1V)
4: The red LED is now on and your battery is charging.
5: Wait until the green LED lights up and thus the charging process is completed.
Charging time:
The charger can charge a maximum of 800 mA per hour. Thus, a 1000 mAh battery will be fully charged in about one hour.
Production & Quality:
Chargers with this design are produced by versch. We work with a manufacturer who is a bit more expensive, but delivers a solid quality - also every charger is tested before delivery.
Links & Downloads:
- Tech Video about Airsoft LiPo batteries: (YouTube, REAPERs Airsoft)
This video also discusses the BBC+ charger.
Review Partner