xFORCE XR003 / XTSP Solar Power Red Dot with 2 mounts -black-
The xFORCE XR003 / XTSP is a very good and comparatively inexpensive red dot sight with dot reticle.
The obliquely installed lens prevents reflections from e.g. sunlight or other light sources
The built-in light sensor allows operation even without battery as soon as sunlight or artificial light falls from above. Here, too, the dot is already displayed very brightly. If this is not sufficient, battery operation can be activated. A total of 10 brightness levels are available here. The reticle is clear and the dot is not blurred. To deactivate battery operation, press + and - simultaneously
The scope of delivery already includes a killflash which protects the lens from damage and dirt. This can also be unscrewed in case of a defect or if you don't like it. Also the mounted protective caps could be removed or adjusted in the angle, for this you simply loosen the foremost aluminum ring and turn the protective cap to the desired position. Height and side can be precisely adjusted with a flathead screwdriver. The adjustment will not be lost even with stronger GBBs
Difference between the xFORCE XR003 / XTSP series and the XFR01 series: the XR003 / XTSP series has 2 mounts included, while the XFR01 series has only one mount. Technically, both series are the same.
Technical data:
Illumination color: Red
Brightness levels: 10
Length: approx. 80mm
Weight: 180g
Material: aluminum
Surface: matte
Battery: CR2032
Mounting: Weaver (20-22mm)
Features:
- Outer housing made of 6061 aluminum
- Angled lens prevents reflections from light sources (e.g. sunlight)
- low power consumption
- sharp display
- 10 brightness settings
- Operation also possible without battery (light source from above provided)
- Lens diameter 25mm
- also for GBBs with high recoil
- Killflash and protective caps included
- QD riser and flat mount included
Mounts:
QD Riser Mount: Here a common aluminum QD clamp mount is included. The visor line is increased by 30mm. It would also be possible to rotate the visor 180° on the mount. The mount is designed for 20 - 21mm rails. If the mounting is not tight with you, just tighten the side nut a little tighter with a 10mm cable wrench
Flat mount: As the name implies, this is a low-mount which fulfills its application mostly on SMGs or as an add-on for a ZF. An allen wrench is needed for mounting, which is included
Links & Reviews:
- xFORCE XFR01 Reddot Video Review (YouTube, Vid0005 Airsoft)
- WE / KJW / Army Armament G17, KP13 & R17 Mount for full metal Reddot & xFORCE XFR01
- Begadi U-Type High Mount for Reddots (CNC machined, aluminum)
- xFORCE Solar Power Red Dot Video Review (YouTube, Q-Airsoft)
- xFORCE Solar Power Red Dot Video Review (YouTube, JOKERFACE AIRSOFT)
- xFORCE Solar Power Red Dot Video Review, French (YouTube, Golgy, a sunday gamer)
- xFORCE Solar Power Red Dot Video Review (YouTube, TEAM-030-AIRSOFT)
Rendering with caps removed for adjustment options:
Rendering without killflash:
Bottom illustration:
The obliquely installed lens prevents reflections from e.g. sunlight or other light sources
The built-in light sensor allows operation even without battery as soon as sunlight or artificial light falls from above. Here, too, the dot is already displayed very brightly. If this is not sufficient, battery operation can be activated. A total of 10 brightness levels are available here. The reticle is clear and the dot is not blurred. To deactivate battery operation, press + and - simultaneously
The scope of delivery already includes a killflash which protects the lens from damage and dirt. This can also be unscrewed in case of a defect or if you don't like it. Also the mounted protective caps could be removed or adjusted in the angle, for this you simply loosen the foremost aluminum ring and turn the protective cap to the desired position. Height and side can be precisely adjusted with a flathead screwdriver. The adjustment will not be lost even with stronger GBBs
Difference between the xFORCE XR003 / XTSP series and the XFR01 series: the XR003 / XTSP series has 2 mounts included, while the XFR01 series has only one mount. Technically, both series are the same.
Technical data:
Illumination color: Red
Brightness levels: 10
Length: approx. 80mm
Weight: 180g
Material: aluminum
Surface: matte
Battery: CR2032
Mounting: Weaver (20-22mm)
Features:
- Outer housing made of 6061 aluminum
- Angled lens prevents reflections from light sources (e.g. sunlight)
- low power consumption
- sharp display
- 10 brightness settings
- Operation also possible without battery (light source from above provided)
- Lens diameter 25mm
- also for GBBs with high recoil
- Killflash and protective caps included
- QD riser and flat mount included
Mounts:
QD Riser Mount: Here a common aluminum QD clamp mount is included. The visor line is increased by 30mm. It would also be possible to rotate the visor 180° on the mount. The mount is designed for 20 - 21mm rails. If the mounting is not tight with you, just tighten the side nut a little tighter with a 10mm cable wrench
Flat mount: As the name implies, this is a low-mount which fulfills its application mostly on SMGs or as an add-on for a ZF. An allen wrench is needed for mounting, which is included
Links & Reviews:
- xFORCE XFR01 Reddot Video Review (YouTube, Vid0005 Airsoft)
- WE / KJW / Army Armament G17, KP13 & R17 Mount for full metal Reddot & xFORCE XFR01
- Begadi U-Type High Mount for Reddots (CNC machined, aluminum)
- xFORCE Solar Power Red Dot Video Review (YouTube, Q-Airsoft)
- xFORCE Solar Power Red Dot Video Review (YouTube, JOKERFACE AIRSOFT)
- xFORCE Solar Power Red Dot Video Review, French (YouTube, Golgy, a sunday gamer)
- xFORCE Solar Power Red Dot Video Review (YouTube, TEAM-030-AIRSOFT)
Rendering with caps removed for adjustment options:
Rendering without killflash:
Bottom illustration:
Review Partner