Maple Leaf 50° "Super Macaron" AEG (Spring Pressure & GBB) Flat Hop Bucking / Rubber - Green
Attention: This bucking is specially designed for spring pressure and GBB models which take a normal AEG bucking! For use in a normal (S)AEG it may come to feeding problems due to the very tight sealing lip!
With the SUPER MACARON series, Maple Leaf has developed a new type of flathop bucking, which has a centering lip on the right and left of the trigger lip or trigger triangle, whereby the triangle is held exactly in the center. Thus, the rubber is always centered in the barrel (provided it is installed correctly)
The triangle is flat and ensures that the ball is well enclosed by the rubber to distribute the spin effect of the ball over the largest possible area. This effect is much more effective in terms of precision and range than a standard hop-up. The sealing lip is slightly tighter than the normal Macaron to ensure a good seal to the cylinder head and nozzle
Suitable for:
Spring pressure models which accept a normal AEG bucking e.g. Silverback SRS, MB01 with AEG HopUp Unit, MB03 and VSR10 with AEG HopUp Unit GBB models which accept a normal AEG bucking e.g. GHK, VFC HK416 with AEG HopUp Unit
Examples for compatible HopUp Units:
- AirsoftPro VSR CNC HopUp Unit Set incl. Cylinderhead
- Silverback SRS "FAST" HopUp Unit Set incl. Flat Hop
- Silverback SRS HopUp Unit Set (Dual)
- AirsoftPro L96 / MB01 CNC HopUp Unit
- PHX Precision Metal Hop Up Unit Type 96
- Synthesis L96/MB01 AEG Barrel Hop Up Unit [HOP-L96]
- PPS L96/MB01 AEG Barrel Hop Up Unit
General:
Buckings take approximately 500 rounds to properly break in.
Muzzle Velocities - Overview:
50° version: Optimal for muzzle velocities below 110m/s.
60° version: Optimal for muzzle velocities between 90 - 120m/s.
70° version: Optimal for muzzle velocities between 110 - 140m/s.
75° version: Optimal for muzzle velocities between 130 - 150m/s.
80° version: Optimal for muzzle velocities above 150m/s.
With the SUPER MACARON series, Maple Leaf has developed a new type of flathop bucking, which has a centering lip on the right and left of the trigger lip or trigger triangle, whereby the triangle is held exactly in the center. Thus, the rubber is always centered in the barrel (provided it is installed correctly)
The triangle is flat and ensures that the ball is well enclosed by the rubber to distribute the spin effect of the ball over the largest possible area. This effect is much more effective in terms of precision and range than a standard hop-up. The sealing lip is slightly tighter than the normal Macaron to ensure a good seal to the cylinder head and nozzle
Suitable for:
Spring pressure models which accept a normal AEG bucking e.g. Silverback SRS, MB01 with AEG HopUp Unit, MB03 and VSR10 with AEG HopUp Unit GBB models which accept a normal AEG bucking e.g. GHK, VFC HK416 with AEG HopUp Unit
Examples for compatible HopUp Units:
- AirsoftPro VSR CNC HopUp Unit Set incl. Cylinderhead
- Silverback SRS "FAST" HopUp Unit Set incl. Flat Hop
- Silverback SRS HopUp Unit Set (Dual)
- AirsoftPro L96 / MB01 CNC HopUp Unit
- PHX Precision Metal Hop Up Unit Type 96
- Synthesis L96/MB01 AEG Barrel Hop Up Unit [HOP-L96]
- PPS L96/MB01 AEG Barrel Hop Up Unit
General:
Buckings take approximately 500 rounds to properly break in.
Muzzle Velocities - Overview:
50° version: Optimal for muzzle velocities below 110m/s.
60° version: Optimal for muzzle velocities between 90 - 120m/s.
70° version: Optimal for muzzle velocities between 110 - 140m/s.
75° version: Optimal for muzzle velocities between 130 - 150m/s.
80° version: Optimal for muzzle velocities above 150m/s.