Begadi Silverline CNC Gearset (Low Noise) - nickel plated - 13:1 with 12Z Sector Gear
Other interesting articles:
In cooperation with Red Dragon we offer our customers here a high quality, CNC manufactured gear set
A perfect concentricity and low noise level, even at high speed, distinguish this set.
Made of carbon steel, the gears are suitable for all common springs up to M150.
The surface is not as usual black oxidized, but galvanically nickel-plated.
This coating is much harder, more durable and also protects against corrosion.
No Delayer (Gear Clip) necessary! The Sector Gear features a 5mm anchor for the tappet plate. This ensures proper timing and can prevent feeding problems.
Due to the 8 positions on the Bevel Gear for the anti-reversal, gear jams are significantly reduced for weapons without EFCS.
The Bevel Gear is compatible with standard Pinion Gears (e.g. Begadi Mamba, Tienly, SHS, Cyma, Lonex, Red Dragon, E&C, E&L)
Features:
Manufacturing: CNC
Material: carbon steel
Coating: galvanic nickel plated
Gear ratio: 13:1
Sector Gear: 12 teeth (Short Stroke)
Please note that the maximum possible spring strength depends on the installed motor, battery and gear ratio.
Recommendation / guideline: Maximum spring rate for the gear ratio:
26:1 to M160 spring suitable
18:1 to M150 spring suitable
16:1 to M150 spring suitable
13:1 to M130 spring suitable
Optical EFCS:
We tested the Gear Set with a Gate Titanium and could not find any problems with cycle monitoring.
Attention: We strongly advise not to combine the 13:1 Gear Set with a high speed motor (more than 30K revolutions).
Optional Accessories:
- Begadi CNC POM Sector Gear Clip / Delayer for Silverline & Cyma Gear Sets
A perfect concentricity and low noise level, even at high speed, distinguish this set.
Made of carbon steel, the gears are suitable for all common springs up to M150.
The surface is not as usual black oxidized, but galvanically nickel-plated.
This coating is much harder, more durable and also protects against corrosion.
No Delayer (Gear Clip) necessary! The Sector Gear features a 5mm anchor for the tappet plate. This ensures proper timing and can prevent feeding problems.
Due to the 8 positions on the Bevel Gear for the anti-reversal, gear jams are significantly reduced for weapons without EFCS.
The Bevel Gear is compatible with standard Pinion Gears (e.g. Begadi Mamba, Tienly, SHS, Cyma, Lonex, Red Dragon, E&C, E&L)
Features:
Manufacturing: CNC
Material: carbon steel
Coating: galvanic nickel plated
Gear ratio: 13:1
Sector Gear: 12 teeth (Short Stroke)
Please note that the maximum possible spring strength depends on the installed motor, battery and gear ratio.
Recommendation / guideline: Maximum spring rate for the gear ratio:
26:1 to M160 spring suitable
18:1 to M150 spring suitable
16:1 to M150 spring suitable
13:1 to M130 spring suitable
Optical EFCS:
We tested the Gear Set with a Gate Titanium and could not find any problems with cycle monitoring.
Attention: We strongly advise not to combine the 13:1 Gear Set with a high speed motor (more than 30K revolutions).
Optional Accessories:
- Begadi CNC POM Sector Gear Clip / Delayer for Silverline & Cyma Gear Sets
Review Partner