Retro Arms SR25 CNC QSC 8mm Gearbox Set
-
![ICS SG / SAR Europa Sport Selector Gear Set [MI-51]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/3/a/3a042c21f64e9f61e3bde1801341f6db.jpg)
ICS SG / SAR Europa Sport Selector Gear Set [MI-51]Special Price €6.90 Regular Price €9.90
Other interesting articles:
Retro Arms Gearboxshell for SR25 models
Features:
- CNC machined from a solid block of duralumin (AW EN7075 T651) with a higher tensile strength (590MPa) than mild steel (390MPa)
- The entire surface is anodized to protect it from aluminum corrosion
- QSC (Quick Spring Change System) spring change system
- QSC Springguide included
- The shell is recommended by the manufacturer for all spring strengths, with the note that the service life decreases with the strength of the installed spring
- Cable guides extra large for silicone cables up to 2.5mm diameter
- A small protrusion protects the cables from the motor axle
- The axle holes for ARL and Trigger have an additional groove, which holds the spring in position and prevents it from popping out
- Double wall thickness on the cylinder front
- Continuous guide grooves for the piston
- Holes drilled exactly to 7.98mm for 8mm barrel bushings
- Screws included in the scope of delivery
Compatibility:
- Not suitable for the G&G GR25
- Not suitable for A&K K25 (the rear body pin is slightly offset)
Features:
- CNC machined from a solid block of duralumin (AW EN7075 T651) with a higher tensile strength (590MPa) than mild steel (390MPa)
- The entire surface is anodized to protect it from aluminum corrosion
- QSC (Quick Spring Change System) spring change system
- QSC Springguide included
- The shell is recommended by the manufacturer for all spring strengths, with the note that the service life decreases with the strength of the installed spring
- Cable guides extra large for silicone cables up to 2.5mm diameter
- A small protrusion protects the cables from the motor axle
- The axle holes for ARL and Trigger have an additional groove, which holds the spring in position and prevents it from popping out
- Double wall thickness on the cylinder front
- Continuous guide grooves for the piston
- Holes drilled exactly to 7.98mm for 8mm barrel bushings
- Screws included in the scope of delivery
Compatibility:
- Not suitable for the G&G GR25
- Not suitable for A&K K25 (the rear body pin is slightly offset)
Review Partner