Begadi PRO V2 / V3 CNC Cylinderhead with two O-rings and Sorbo Pads (Type2 - 23mm) -blue-
Other interesting articles:
CNC machined cylinder head made of 7075 aluminum with two O-rings, for V2 and (V3) gearboxes.
Designed in Germany.
Features:
- made from 7075 aluminum
- made with a very precise fit
- Optimized design to improve the airflow
- two o-rings for a perfect seal to the cylinder
- suitable for all standard cylinders with 23,70 - 23,80mm inner diameter (not BoreUp or Retro Arms)
- O-ring in the front area to reduce the load on the shell
- special elongated holes prevent damage to the bracket
- fits all common nozzles like Begadi Pro, EPES, SHS, Retro Arms, Maxx, FPS
- 2mm Sorbo Pads included
- Diameter for Gearbox: 23mm (V2 and some V3)
Type2 - 23mm:
This version of our Cylinderhead features a diameter of 23.10mm in the front section, making it compatible with a great many gearboxes.
The front o-ring was chosen harder to prevent the cylinderhead from bouncing when the pistol hits the ground.
The Nozzle mount has a diameter of 5.3mm and is therefore perfectly matched to our Begadi PRO Nozzle with two o-rings.
Sorbo and Piston:
Two Sorbo Pads (50° green + 70° blue) with a height of 2mm each are included.
These are used to adjust the AOE and also cushion the impact of the piston head.
The pads are not glued here as with other manufacturers but firmly inserted.
We recommend using the 50° (green) Sorbo for all S-AEGs up to 2.0 joules.
For AEGs (full auto), the 70° (blue) Sorbo should already be used from 1.5 J.
Please check your mount in the shell for V3 (G36, UMP, AK), it may differ depending on the manufacturer.
We recommend for S&T 316 and S&T UST45 our V3 Cylinderhead with long guide:
Begadi PRO CNC Cylinderhead with two O-rings and Sorbo Pads for V3 Gearboxes with long Nozzle
Please note that this Cylinderhead corrects the AOE and for this a Piston with 14,5 - 15 teeth is needed!
Compatibility overview (as of June 2021)
Designed in Germany.
Features:
- made from 7075 aluminum
- made with a very precise fit
- Optimized design to improve the airflow
- two o-rings for a perfect seal to the cylinder
- suitable for all standard cylinders with 23,70 - 23,80mm inner diameter (not BoreUp or Retro Arms)
- O-ring in the front area to reduce the load on the shell
- special elongated holes prevent damage to the bracket
- fits all common nozzles like Begadi Pro, EPES, SHS, Retro Arms, Maxx, FPS
- 2mm Sorbo Pads included
- Diameter for Gearbox: 23mm (V2 and some V3)
Type2 - 23mm:
This version of our Cylinderhead features a diameter of 23.10mm in the front section, making it compatible with a great many gearboxes.
The front o-ring was chosen harder to prevent the cylinderhead from bouncing when the pistol hits the ground.
The Nozzle mount has a diameter of 5.3mm and is therefore perfectly matched to our Begadi PRO Nozzle with two o-rings.
Sorbo and Piston:
Two Sorbo Pads (50° green + 70° blue) with a height of 2mm each are included.
These are used to adjust the AOE and also cushion the impact of the piston head.
The pads are not glued here as with other manufacturers but firmly inserted.
We recommend using the 50° (green) Sorbo for all S-AEGs up to 2.0 joules.
For AEGs (full auto), the 70° (blue) Sorbo should already be used from 1.5 J.
Please check your mount in the shell for V3 (G36, UMP, AK), it may differ depending on the manufacturer.
We recommend for S&T 316 and S&T UST45 our V3 Cylinderhead with long guide:
Begadi PRO CNC Cylinderhead with two O-rings and Sorbo Pads for V3 Gearboxes with long Nozzle
Please note that this Cylinderhead corrects the AOE and for this a Piston with 14,5 - 15 teeth is needed!
Compatibility overview (as of June 2021)
Nozzle: | Compatible: |
Begadi PRO CNC Nozzle -7075 aluminum with double o-ring | YES (very good) |
EPeS Alu Nozzle with double O-Ring | YES (very good) |
TFC Essential CNC Alu Nozzle with double O-Ring | YES (good) |
TFC CNC Aluminum Air Seal Nozzle | YES (good) |
FPS Softair Aluminum Nozzle | YES (good) |
ICS CNC Aluminum Air Seal Nozzle | YES (good) |
Retro Arms CNC Aluminum Nozzle with O-Ring | YES (good) |
JG S77 and MOD5 Alu Nozzle with O-Ring | YES (good) |
SHS Air Seal Aluminum Nozzle | some play |
UFC Aluminum Nozzle | some play |
Cyma original plastic Nozzle | some play |
A&K original plastic Nozzle | some play |
E&L original plastic Nozzle | some play |
Maxx Model CNC Alu Nozzle with double O-Ring | much play |
E&C original brass Nozzle | much play |
Cylinder: | Compatible: |
FPS Softair Stainless Steel Cylinder | YES (very good) |
Lonex Steel Cylinder | YES (very good) |
TFC Stainless Steel Cylinder | YES (very good) |
JG Original Cylinder | YES (very good) |
Begadi Stainless Steel Cylinder | YES (very good) |
VFC original Cylinder | YES (good) |
Cyma original Cylinder | YES (good) |
A&K original Cylinder | YES (good) |
ICS original Cylinder | YES (good) |
E&C original Cylinder | depending on version |
Retro Arms CNC Cylinder | No |
BoreUp Cylinder | No |
Gearbox (Shell): | Compatible: |
Cyma V2, V3 and SR25 Shells | JA |
Lonex V2 and V3 Shells | JA |
E&C V2 Shell | JA |
VFC Avalon (HK416) V2 Shell | JA |
E&L V2 and V3 Shells | JA |
Retro Arms CNC V2 and V3 Shells | JA |
S&T/UFC/ARES V3 Shells | JA |
ICS V2 upper Shell | JA |
G&G V2 and V3 Shells | JA |
Specna Arms V2 Shell | JA |
Ares V2 Shell | JA |
King Arms/Tippmann V2 Shell | JA |
A&K V2 Shell | JA |
JG V2 Shell | JA |
JG V3 Shell | JA |