Airsoft Systems ASCU PRO, for version 3 Gearbox - "Semi Only Version"
-
VFC M4 / HK416 AEG Buttstock extension cableSpecial Price €6.90 Regular Price €12.90
Other interesting articles:
With the new ASCU PRO (Airsoft Smart Control Unit), Airsoft Systems delivers a resilient, mechanical EFCS (Electronic Fire Control System) for all common V3 gearboxes.
This system has an automatic PreCocking Mode (can be deactivated), here the piston is preloaded depending on the spring strength, motor and battery after the firing process to be able to release the next shot faster. Also, the ASCU PRO has an automatic active brake, here the motor is braked only as much as necessary. Since this system can be loaded with up to 240A for short periods, even larger 11.1V LiPos are no problem. (We do not recommend to use RC batteries with 60C+!)
Features:
- Single Board Design
- Mosfet
- Mechanical microswitch
- Cycle monitoring
- Automatic active brake
- Automatic PreCocking (can be deactivated)
- Adjustable firing modes (International version only)
- Fast firing sequences
- Mechanical safety
- Battery monitoring and battery shutdown
- Compatible with LiPo, LiFe, LiIon and NiMH batteries
- up to 15V possible (11,1V is recommended)
- Short time loadable up to 240A
- 16 AWG cable with T-connector
- Short circuit protection
- Compatible with almost all V3 gearboxes
- 3 years warranty
- Made in EU
Info about the versions offered in the store:
We offer our customers 2 versions of the system. On the one hand the international version (ownership in Germany allowed, installation not) and an official "Semi Only" version for use in Germany!
The international version can be easily programmed in four different modes.
The ASCU Pro is also compatible with the ASHU, for more information see the ASHU manual.
Note on installation:
A detailed installation and user manual in English can be found linked below.
Please note that good technical knowledge is required for installation! A defect due to an installation error is not covered by the warranty.
Details about the installation service:
If you would like to have the ASCU Mosfet installed in an airsoft gun already purchased from Begadi, please contact our workshop - we will be happy to provide a quote. If you order an airsoft weapon from Begadi and would like to have the ASCU installed by our workshop at the same time, please place the desired weapon in the shopping cart as normal (without Mosfet tuning package or other) and select the installation service as an option for the ASCU and then also place this in the shopping cart and order both together. The ASCU will then be installed directly for you.
The installation service is only available for airsoft guns purchased from Begadi. The installation can only be done with compatible gearbox versions.
If you have more than one weapon in your shopping cart, please indicate in the comment field of the order in which weapon the Mosfet should be installed.
Links & Downloads:
- Airsoft Systems ASCU PRO V3 Installation and User Manual, english
- Airsoft Systems ASCU PRO Video Review + Installation (YouTube, TEAM-030- AIRSOFT)
- Airsoft Systems ASCU PRO V3 Video Review + Installation Begadi HUSAR (YouTube, TEAM-030- AIRSOFT)
This system has an automatic PreCocking Mode (can be deactivated), here the piston is preloaded depending on the spring strength, motor and battery after the firing process to be able to release the next shot faster. Also, the ASCU PRO has an automatic active brake, here the motor is braked only as much as necessary. Since this system can be loaded with up to 240A for short periods, even larger 11.1V LiPos are no problem. (We do not recommend to use RC batteries with 60C+!)
Features:
- Single Board Design
- Mosfet
- Mechanical microswitch
- Cycle monitoring
- Automatic active brake
- Automatic PreCocking (can be deactivated)
- Adjustable firing modes (International version only)
- Fast firing sequences
- Mechanical safety
- Battery monitoring and battery shutdown
- Compatible with LiPo, LiFe, LiIon and NiMH batteries
- up to 15V possible (11,1V is recommended)
- Short time loadable up to 240A
- 16 AWG cable with T-connector
- Short circuit protection
- Compatible with almost all V3 gearboxes
- 3 years warranty
- Made in EU
Info about the versions offered in the store:
We offer our customers 2 versions of the system. On the one hand the international version (ownership in Germany allowed, installation not) and an official "Semi Only" version for use in Germany!
The international version can be easily programmed in four different modes.
The ASCU Pro is also compatible with the ASHU, for more information see the ASHU manual.
Note on installation:
A detailed installation and user manual in English can be found linked below.
Please note that good technical knowledge is required for installation! A defect due to an installation error is not covered by the warranty.
Details about the installation service:
If you would like to have the ASCU Mosfet installed in an airsoft gun already purchased from Begadi, please contact our workshop - we will be happy to provide a quote. If you order an airsoft weapon from Begadi and would like to have the ASCU installed by our workshop at the same time, please place the desired weapon in the shopping cart as normal (without Mosfet tuning package or other) and select the installation service as an option for the ASCU and then also place this in the shopping cart and order both together. The ASCU will then be installed directly for you.
The installation service is only available for airsoft guns purchased from Begadi. The installation can only be done with compatible gearbox versions.
If you have more than one weapon in your shopping cart, please indicate in the comment field of the order in which weapon the Mosfet should be installed.
Links & Downloads:
- Airsoft Systems ASCU PRO V3 Installation and User Manual, english
- Airsoft Systems ASCU PRO Video Review + Installation (YouTube, TEAM-030- AIRSOFT)
- Airsoft Systems ASCU PRO V3 Video Review + Installation Begadi HUSAR (YouTube, TEAM-030- AIRSOFT)
Review Partner