Airsoft Systems ASCU PRO, for version 3 Gearbox - "international version"
![ICS Wire Guard Assembly [MA-23]](https://www.begadi.com/media/catalog/product/cache/a491986f8011072f66fb1fed37f51dcc/4/1/41a82345c5853ecb5aafbb419ec88ac5.jpg)
Other interesting articles:
With the new ASCU PRO (Airsoft Smart Control Unit), Airsoft Systems delivers a resilient, mechanical EFCS (Electronic Fire Control System) for all common V3 gearboxes.
This system has an automatic PreCocking Mode (can be deactivated), here the piston is preloaded depending on the spring strength, motor and battery after the firing process to be able to release the next shot faster. Also, the ASCU PRO has an automatic active brake, here the motor is braked only as much as necessary. Since this system can be loaded with up to 240A for short periods, even larger 11.1V LiPos are no problem. (We do not recommend to use RC batteries with 60C+!)
Features:
- Single Board Design
- Mosfet
- Mechanical microswitch
- Cycle monitoring
- Automatic active brake
- Automatic PreCocking (can be deactivated)
- Adjustable firing modes (International version only)
- Fast firing sequences
- Mechanical safety
- Battery monitoring and battery shutdown
- Compatible with LiPo, LiFe, LiIon and NiMH batteries
- up to 15V possible (11,1V is recommended)
- Short time loadable up to 240A
- 16 AWG cable with T-connector
- Short circuit protection
- Compatible with almost all V3 gearboxes
- 3 years warranty
- Made in EU
Info about the versions offered in the store:
We offer our customers 2 versions of the system. On the one hand the international version (possession in Germany permitted, installation however only with Airsoft weapons < 0,5 J. permitted) and an official "Semi Only" version for the use in Germany!
The international version can be easily programmed in four different modes.
The implementation / programming of the international version is very simple: Connect the battery and before the ASCU gives your start signal, set the fire selection to "full auto" and bend once. Now you are in programming mode. Now the ASCU counts through the individual programs by means of vibration. When the desired program is listed, simply hold the trigger down until you hear a confirmation vibration. Done. The ASCU saves the program and there is no need to remove and reconnect the battery for confirmation.
The modes are as follows:
-1. semi, combined burst and full auto (factory settings)
-2. semi, full auto
-3. semi, 3 shot burst
-4th Semi, Semi
The ASCU Pro is also compatible with the ASHU, see the ASHU manual for more information.
Note on installation:
A detailed installation and use manual in English can be found linked below.
Please note that good technical knowledge is required for installation! A defect due to an installation error is not covered by warranty.
For customers who are interested in an ASCU Pro and own a gun purchased from Begadi, we offer (for the "semi only" version) an installation service. Also with a new purchase of an Airsoft weapon we can already install the ASCU Pro for you (International version only with 0.5J Airsofts), please select this option if you are interested in the tuning options of the weapon or send us a request via the Begadi workshop
Links & Downloads:
- Airsoft Systems ASCU PRO V3 Installation and User Manual, English
- Airsoft Systems ASCU PRO Video Review + Installation (YouTube, TEAM-030- AIRSOFT)
- Airsoft Systems ASCU PRO V3 Video Review + Installation Begadi HUSAR (YouTube, TEAM-030- AIRSOFT)
This system has an automatic PreCocking Mode (can be deactivated), here the piston is preloaded depending on the spring strength, motor and battery after the firing process to be able to release the next shot faster. Also, the ASCU PRO has an automatic active brake, here the motor is braked only as much as necessary. Since this system can be loaded with up to 240A for short periods, even larger 11.1V LiPos are no problem. (We do not recommend to use RC batteries with 60C+!)
Features:
- Single Board Design
- Mosfet
- Mechanical microswitch
- Cycle monitoring
- Automatic active brake
- Automatic PreCocking (can be deactivated)
- Adjustable firing modes (International version only)
- Fast firing sequences
- Mechanical safety
- Battery monitoring and battery shutdown
- Compatible with LiPo, LiFe, LiIon and NiMH batteries
- up to 15V possible (11,1V is recommended)
- Short time loadable up to 240A
- 16 AWG cable with T-connector
- Short circuit protection
- Compatible with almost all V3 gearboxes
- 3 years warranty
- Made in EU
Info about the versions offered in the store:
We offer our customers 2 versions of the system. On the one hand the international version (possession in Germany permitted, installation however only with Airsoft weapons < 0,5 J. permitted) and an official "Semi Only" version for the use in Germany!
The international version can be easily programmed in four different modes.
The implementation / programming of the international version is very simple: Connect the battery and before the ASCU gives your start signal, set the fire selection to "full auto" and bend once. Now you are in programming mode. Now the ASCU counts through the individual programs by means of vibration. When the desired program is listed, simply hold the trigger down until you hear a confirmation vibration. Done. The ASCU saves the program and there is no need to remove and reconnect the battery for confirmation.
The modes are as follows:
-1. semi, combined burst and full auto (factory settings)
-2. semi, full auto
-3. semi, 3 shot burst
-4th Semi, Semi
The ASCU Pro is also compatible with the ASHU, see the ASHU manual for more information.
Note on installation:
A detailed installation and use manual in English can be found linked below.
Please note that good technical knowledge is required for installation! A defect due to an installation error is not covered by warranty.
For customers who are interested in an ASCU Pro and own a gun purchased from Begadi, we offer (for the "semi only" version) an installation service. Also with a new purchase of an Airsoft weapon we can already install the ASCU Pro for you (International version only with 0.5J Airsofts), please select this option if you are interested in the tuning options of the weapon or send us a request via the Begadi workshop
Links & Downloads:
- Airsoft Systems ASCU PRO V3 Installation and User Manual, English
- Airsoft Systems ASCU PRO Video Review + Installation (YouTube, TEAM-030- AIRSOFT)
- Airsoft Systems ASCU PRO V3 Video Review + Installation Begadi HUSAR (YouTube, TEAM-030- AIRSOFT)
Review Partner