Tappet Plate for Begadi HPA System -V2 Version, 70mm-
Other interesting articles:
Reinforced Tappet Plate, suitable for the Begadi HPA system.
Made from very robust technopolymer with fiber content.
This achieves a very high tensile strength, but still has sufficient flexibility to prevent breakage. The bulges on the side guides reduce friction with the Gearbox.
Installation instructions:
When selecting the correct Tappet Plates, you should use the original that was/is fitted on delivery as a guide. Whether the Tappet Plate is fitted with an O-ring or without an O-ring, and which version was fitted. There may be model-specific differences here and, for example, a V2 Tappet Plate may be fitted to individual V3 models. (Gearbox from manufacturer X is e.g. 1mm longer than from manufacturer Y). If you are unsure about this, our support team will be happy to help and advise you.
Properties:
Material: Technopolymer with fiber content
Gearbox: V2 (only suitable for the Begadi HPA system)
Length: 70 mm
Width: 13.3 mm
Front width: 8.1 mm
The item shown above is a tested accessory for our HPA system. Barrels were used for a long time during development and tested for function
Further interesting articles and information about HPA systems
- Begadi HPA seals for system maintenance (complete)
- Tappet Plates for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA system (screws, Springs, pins, connector)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details1.jpg)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details2.jpg)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details3.jpg)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details4.jpg)
Made from very robust technopolymer with fiber content.
This achieves a very high tensile strength, but still has sufficient flexibility to prevent breakage. The bulges on the side guides reduce friction with the Gearbox.
Installation instructions:
When selecting the correct Tappet Plates, you should use the original that was/is fitted on delivery as a guide. Whether the Tappet Plate is fitted with an O-ring or without an O-ring, and which version was fitted. There may be model-specific differences here and, for example, a V2 Tappet Plate may be fitted to individual V3 models. (Gearbox from manufacturer X is e.g. 1mm longer than from manufacturer Y). If you are unsure about this, our support team will be happy to help and advise you.
Properties:
Material: Technopolymer with fiber content
Gearbox: V2 (only suitable for the Begadi HPA system)
Length: 70 mm
Width: 13.3 mm
Front width: 8.1 mm
The item shown above is a tested accessory for our HPA system. Barrels were used for a long time during development and tested for function
Further interesting articles and information about HPA systems
- Begadi HPA seals for system maintenance (complete)
- Tappet Plates for Begadi HPA System -SVD/SVU Version-
- Tappet Plate for Begadi HPA System -V6/Tommy/P90 Version-
- Tappet Plate for Begadi HPA System -V3 Version -71mm-
- Tappet Plate for Begadi HPA System -V2 Version -70mm-
- Spare part kit for Begadi HPA system (screws, Springs, pins, connector)
![line](/media/begadi_img/line_fade_grey.webp)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details1.jpg)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details2.jpg)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details3.jpg)
![](/catalog/images/b-26523910-begadi-hpa-v2-tappet-plate-70mm-details4.jpg)